Release Notes

New features, enhancements and minor bug fixes are listed below for each release done so far for AIO Tests.

26th October, 2024 → Cloud: v4.7.4

New Features

Enhancements

  • AI enhancements: Users can now choose output language in which cases should be generated via AI.

  • Reports enhancements: Users can now create dynamic filters for Cases (same like cycles). Impacted reports - Case distribution, automation coverage and automation burndown.

  • Releases and Components fields are now multiselect allowing users to select more than 1 value.

  • Customizable Actual result - Users can set the verbiage for default actual results text.

Minor Bug Fixes

  • Exact Jira issue key to show on top in the list while linking Jira requirements.

14th September, 2024 → Cloud: v4.7.3

New Features

  • Execution Planning:

    • Users can now create/edit/review Cycle execution plan for planning their execution progress and track it.

    • Burndown report enhanced to show planned execution graph and data to compare planned pending execution vs actual completed execution.

    • New report Execution Burnup introduced to compare planned completed execution vs actual completed execution.

  • Cross Project Support in Multicycle Execution Summary report/gadget: Will now allow selecting cycles from multiple different projects in the input.

  • Cross project support in Automation Coverage report/gadget: Will now allow selection and distribution of cases using cases/sets/cycles from multiple projects.

Enhancements

  • AI enhancements:

    • Users will now be able to setup their own Al token limit which will be used once AlO allotted token limit is exhausted.

    • Requirement input enhanced to also take Epic/Feature type issues and their child issues as input for cases generation.

    • Ability to include additional fields for requirement input.

  • Reports enhancements:

    • Traceability Summary and Detail Reports enhanced to include Jira fields.

    • Traceability summary report now supports Sorting for grid fields.

    • Cases filters enhanced in Case Distribution/Automation coverage/Automation Burndown reports for better experience.

    • Traceability Summary and Detail/Case Distribution/Automation coverage/Automation Burndown/Defect Impact reports enhanced to have an option to exclude archived cases.

    • Project Activity report enhanced to include archived cases.

Minor Bug Fixes

  • Jira panel fixes.

  • Import batch job errors fixed.

3rd September, 2024 → Data Center: v4.7.2.0

New Features

  • Import Cases: Mandatory field validations will be done now while importing cases from Excel/CSV.

  • New APIs:

  • Import Cases: Mandatory field validations will be done now while importing cases from Excel/CSV.

  • Create/Update BDD/Gherkin cases from scenarios: Users now have an option to Create/Update BDD/Gherkin cases by pasting scenarios.

  • Cross Project Support in Traceability Summary and Detail reports/gadgets: Both these reports and gadgets now allow selecting cycles from multiple different projects in the input.

  • Import Feature files: Mandatory field validations will be done now while importing cases from feature files.

  • Remove unused BDD steps: BDD/Gherkin steps not linked to any case will now be removed from system via scheduled batch job.

  • Sorting in Jira panel: Users will now be able to apply sort on Cases tab fields in Jira panel.

Enhancements

  • Export of Feature files will now include Folder tags as well to specify the folder of cases getting exported.

  • Import Feature files enhancements:

    • Users will now have the option to update optional fields as well in addition to mandatory fields.

    • Users will now be able to add/update folder for cases getting imported.

    • Users will now need to provide mandatory fields values only if they choose to update existing fields.

    • Email notifications will be sent for user fields mapped while import.

  • AI enhancements:

    • Option to select default folder for generated cases.

    • Ability for the users to specify the types of testcases they want to get generated.

    • Character limit for Text based requirements increased to 15000.

    • OpenAI model upgrade to "gpt-4o-mini" for better performance.

    • New countries added to OpenAI APIs whitelist.

  • Automation Coverage Report / Gadget: Case Date fields added in grouping list in input.

  • Copy Cycle: Users will now have the option to Copy Latest Runs and all their data while copying a cycle.

  • Copy/Move Runs: Users now have the option to Copy Latest Runs/Move all runs from one cycle to another.

  • Timer enhancements:

    • Timer stop dialog will be prompted when the run status changes to a final status.

    • Timer data will be included and prompted when the run status changes to a status having actual effort mandatory.

  • Marking a Step as ‘Works as Expected’ will now mark status of corresponding step as Passed.

  • Create a new Cycle from existing Sets API has been enhanced to accept multiple Sets as input.

  • Create Case API has been enhanced to allow creation of steps and datasets.

  • Performance enhancements for Robot.

  • PDF export of Cycle run data will now also include step level comments.

  • Drill-down Capabilities added in Reports/Gadgets:

    • User Activity and Project Activity Reports/gadgets: All columns in the grid will be now links to show drilldown of data.

    • Automation coverage and Automation burndown reports: Drilldown capability has been added to Effort cards and columns in the grid.

18th August, 2024 → Cloud: v4.7.2

New Features

  • New APIs:

    • Get Sets API has been added to get the list of Sets in the system.

    • Search Sets API has been added to get Set list filtered as per the provided search criteria.

    • Get Cases associated with Set API has been added to get list of Cases associated with a Set.

  • Import Cases: Mandatory field validations will be done now while importing cases from Excel/CSV.

Enhancements

  • Export of Feature files will now include Folder tags as well to specify the folder of cases getting exported.

  • Import Feature files enhancements:

    • Users will now have the option to update optional fields as well in addition to mandatory fields.

    • Users will now be able to add/update folder for cases getting imported.

    • Users will now need to provide mandatory fields values only if they choose to update existing fields.

    • Email notifications will be sent for user fields mapped while import.

  • AI enhancements:

    • Option to select default folder for generated cases.

    • Ability for the users to specify the types of testcases they want to get generated.

    • Character limit for Text based requirements increased to 15000.

    • OpenAI model upgrade to "gpt-4o-mini" for better performance.

    • New countries added to OpenAI APIs whitelist.

  • Automation Coverage Report / Gadget: Case Date fields added in grouping list in input.

  • Copy Cycle: Users will now have the option to Copy Latest Runs and all their data while copying a cycle.

  • Copy/Move Runs: Users now have the option to Copy Latest Runs/Move all runs from one cycle to another.

  • Timer enhancements:

    • Timer stop dialog will be prompted when the run status changes to a final status.

    • Timer data will be included and prompted when the run status changes to a status having actual effort mandatory.

  • Marking a Step as ‘Works as Expected’ will now mark status of corresponding step as Passed.

  • Create a new Cycle from existing Sets API has been enhanced to accept multiple Sets as input.

  • Performance enhancements for Robot.

21st July, 2024 → Data Center: v4.7.0.0

New Features

  • Test case versioning: Users can now create, maintain and work with multiple versions of a test case.

  • Multiple Gherkin Languages support: AIO now supports Gherkin keywords from all 70 languages that Gherkin has support for.

  • Import Linked cases: Users will now be able to link external as well as existing AIO cases in steps while importing cases via excel/csv.

  • Pin Tabs: Users will now be able to pin the tab they are working on so that post refresh they land on the pinned tab.

Enhancements

  • Import users while importing cases: Users can now map and import Owner, Automation Owner and User custom fields while importing cases via excel/csv.

  • Bulk Edit steps: Users can now edit automation key using bulk edit steps.

  • AI Assistant for generating cases is now capable of generating output in the language in which stories are written.

  • Attachments files now also support .log, .msg, .eml and .pem extension files.

  • New filters and Column selectors have been added for Case Created and Version Created date.

  • Traceability summary report has been enhanced to also show Requirement Summary, Type, Status & Priority in Excel as well as PDF reports.

  • Multi Cycle Distribution Report & Gadget - Date fields are also available now as grouping option in the Distribution.

  • Defect Grid filters: Execution Summary Reports and Defect Summary gadget now support filters for the defects grid.

  • Case progress bar: Look and feel of Case progress bar on Cycles listing and Jira panel has been enhanced for better experience.

  • Add Cases button added on Execution tab of Cycles and Cases tab of Sets

  • Robot Framework results parser now supports reports generated from Rebot.

13th July, 2024 → Cloud: V4.7.1

New Features

  • Create/Update BDD/Gherkin cases from scenarios: Users now have an option to Create/Update BDD/Gherkin cases by pasting scenarios.

  • Cross Project Support in Traceability Summary and Detail reports/gadgets: Both these reports and gadgets now allow selecting cycles from multiple different projects in the input.

  • Import Feature files: Mandatory field validations will be done now while importing cases from feature files.

  • New APIs:

  • Remove unused BDD steps: BDD/Gherkin steps not linked to any case will now be removed from system via scheduled batch job.

  • Sorting in Jira panel: Users will now be able to apply sort on Cases tab fields in Jira panel.

Enhancements

  • PDF export of Cycle run data will now also include step level comments.

  • Drill-down Capabilities added in Reports/Gadgets:

    • User Activity and Project Activity Reports/gadgets: All columns in the grid will be now links to show drilldown of data.

    • Automation coverage and Automation burndown reports: Drilldown capability has been added to Effort cards and columns in the grid.

  • New filters and Column selectors have been added for Case Created and Version Created date 

  • Attachments files formats now also support .pem extension files.

  • Create Case API has been enhanced to allow creation of steps and datasets.

15th June, 2024 → Cloud: V4.7

New Features

  • Test case versioning: Users can now create, maintain and work with multiple versions of a test case.

Enhancements

  • Attachments files now also support .log, .msg and .eml extension files.

  • Traceability summary report has been enhanced to also show Requirement Summary, Type, Status & Priority in Excel as well as PDF reports.

19th May, 2024 → Cloud: V4.6.3

Enhancements

  • AI Assistant for generating cases is now capable of generating output in the language in which stories are written

  • Add Cases button added on Execution tab of Cycles and Cases tab of Sets

  • AIO Tests Status page link has been added within the app under the Support options

14th April, 2024 → Cloud: V4.6.2

New Features

  • Multiple Gherkin Languages support: AIO now supports Gherkin keywords from all 70 languages that Gherkin has support for.

  • Import Linked cases: Users will now be able to link external as well as existing AIO cases in steps while importing cases via excel/csv.

  • Storage Manager: Users will now be able to review and cleanup old attachments in their projects.

  • Pin Tabs: Users will now be able to pin the tab they are working on so that post refresh they land on the pinned tab.

Enhancements

  • Import users while importing cases: Users can now map and import Owner, Automation Owner and User custom fields while importing cases via excel/csv.

  • Bulk Edit steps: Users can now edit automation key using bulk edit steps.

  • Multi Cycle Distribution Report & Gadget - Date fields are also available now as grouping option in the Distribution.

  • Defect Grid filters: Execution Summary Reports and Defect Summary gadget now support filters for the defects grid.

  • Case progress bar: Look and feel of Case progress bar on Cycles listing and Jira panel has been enhanced for better experience.

  • Robot Framework results parser now supports reports generated from Rebot.

15th June, 2024 → Data Center: v4.6.2.0

Checkout this video to get a glimpse of key features in this release →

https://youtu.be/EHEzMLfTFNM

New Features

  • Predefined Project level Parameters: Users can now create Parameters for datasets at project level and re-use them across cases.

  • Customizable Automation Statuses: Ability to create customized Automation statuses for a project has been added

  • Defect Trend Report: This new report will help users see the the created vs resolved defects for selected cycles and the trend of unresolved defects along the selected time period

  • Defects Tab on Jira Panel: For increased visibility of story’s traceability, a new tab “Defects” has been added to AIO Tests panel in Jira.

  • Draft Case visibility for Admins: Jira Admins, Project Admins and AIO Admins will now have the option to view draft cases of other users

Enhancements

  • Latest Run deletion ability: Users can now delete the latest run if there are more than one runs present on the test case in a cycle.

  • Auto-save actual results: Actual results will auto-save if users click outside of the box for any action

  • Populate actual results with pre-defined text: A new icon has been introduced which will help fill the actual results with a pre-defined text of “Works as expected”

  • Set/Cycle Updated date: The "Updated" date of Sets and Cycles will be updated with addition and removal of cases

  • PDF export of Cases full Title display: Title will be fully displayed in the Index page of PDF export

  • Bulk unassign users in Cycles: Bulk un-assign of users is now possible by leaving the bulk assign users input blank

  • Re-indexing updates in History tab: If re-indexing is done, History tab will show the key change

  • Show issues in navigator for Reports: Users looking to do analysis on defects can use this option added to Single and Multi-cycle Summary reports and Defect Trend report to view the issues in Jira

16th Mar, 2024 → Cloud: V4.6.1

Checkout this video to get a glimpse of key features in this release →

New Features

  • Predefined Project level Parameters: Users can now create Parameters for datasets at project level and re-use them across cases.

  • Customizable Automation Statuses: Ability to create customized Automation statuses for a project has been added

  • Defect Trend Report: This new report will help users see the the created vs resolved defects for selected cycles and the trend of unresolved defects along the selected time period

  • Defects Tab on Jira Panel: For increased visibility of story’s traceability, a new tab “Defects” has been added to AIO Tests panel in Jira.

  • Draft Case visibility for Admins: Jira Admins, Project Admins and AIO Admins will now have the option to view draft cases of other users

Enhancements

  • Latest Run deletion ability: Users can now delete the latest run if there are more than one runs present on the test case in a cycle.

  • Auto-save actual results: Actual results will auto-save if users click outside of the box for any action

  • Populate actual results with pre-defined text: A new icon has been introduced which will help fill the actual results with a pre-defined text of “Works as expected”

  • Set/Cycle Updated date: The "Updated" date of Sets and Cycles will be updated with addition and removal of cases

  • PDF export of Cases full Title display: Title will be fully displayed in the Index page of PDF export

  • Bulk unassign users in Cycles: Bulk un-assign of users is now possible by leaving the bulk assign users input blank

  • Re-indexing updates in History tab: If re-indexing is done, History tab will show the key change

  • Show issues in navigator for Reports: Users looking to do analysis on defects can use this option added to Single and Multi-cycle Summary reports and Defect Trend report to view the issues in Jira

25th Feb, 2024 → Data Center: V4.6.0.0

Checkout this video to get a glimpse of key features in this release

Quick View of Features in AIO Tests 4.6 Release.mp4

New Features

  • New Report: Multi Cycle Execution Comparison report added to compare execution results across Cycles.

  • Email subscription for reports: Users can now subscribe and receive their saved reports via email at a set schedule (Daily/Monthly etc.).

  • AI Assistant - BETA: AI integration with AIO Tests has been introduced which will enable users to generate sample test cases with help of AI.

Enhancements

  • Show percentages in reports:

    • Percentage values will be shown now along with the count for all the Run status columns in the grid for Multi Cycle Execution Summary and Multi Cycle Execution Distribution reports.

    • Pending %age column added to Execution burndown report to show percentage of pending cases.

Note: Percentage value will only be shown for non-zero values.

  • Performance enhancements: Multi Cycle Execution Summary and Multi Cycle Execution Detail Reports have been enhanced for better performance.

  • Archived indicators in Reports/Gadgets - Reports/gadgets will now also show indicator for Archived Cases and Cycles.

  • Robot 7.0 is supported now for importing automation results using Robot framework.

  • Users will now be able to specify/update Folder for cases creation while importing automation results.

  • Dataset parameter values limit for 255 characters removed.

  • Cycle Execution enhancements:

    • Full screen view option added for a better experience while working on Cycle Execution.

    • Comments and attachments icons added at Case level to show all Comments/attachments attached to the case.

    • Performance enhancements for Run status updates.

Minor Bug FixesMibor

  • Automatic assignment of cases to happen only for Unassigned cases.

3rd Feb, 2024 → Cloud: v4.6

Checkout this video to get a glimpse of key features in this release

Quick View of Features in AIO Tests 4.6 Release.mp4

New Features

  • New Report: Multi Cycle Execution Comparison report added to compare execution results across Cycles.

  • Email subscription for reports: Users can now subscribe and receive their saved reports via email at a set schedule (Daily/Monthly etc.).

Enhancements

  • Show percentages in reports:

    • Percentage values will be shown now along with the count for all the Run status columns in the grid for Multi Cycle Execution Summary and Multi Cycle Execution Distribution reports.

    • Pending %age column added to Execution burndown report to show percentage of pending cases.

Note: Percentage value will only be shown for non-zero values.

  • Performance enhancements: Multi Cycle Execution Summary and Multi Cycle Execution Detail Reports have been enhanced for better performance.

  • Archived indicators in Reports/Gadgets - Reports/gadgets will now also show indicator for Archived Cases and Cycles.

  • Robot 7.0 is supported now for importing automation results using Robot framework.

  • Users will now be able to specify/update Folder for cases creation while importing automation results.

  • Dataset parameter values limit for 255 characters removed.

  • Cycle Execution enhancements:

    • Full screen view option added for a better experience while working on Cycle Execution.

    • Comments and attachments icons added at Case level to show all Comments/attachments attached to the case.

    • Performance enhancements for Run status updates.

Minor Bug Fixes

  • Automatic assignment of cases to happen only for Unassigned cases.

17th January, 2024 → Server: v4.5.0 & Data Center: v4.5.0.0

New Features

  • Run Step assignments: Users will now be able to assign users at step level.

    • Note: Run step assignments can be controlled at Project level and Case level.

  • Import automation results using Robot Framework is also supported now.

  • New API has been introduced for importing automation results as a batch process.

  • Folder Permissions: New Project Level Permissions added for Folders Creation/Renaming/Move/Deletion.

  • New APIs:

Enhancements

  • Select List custom fields limit increase: Allowed list values limit for Single/Multi select list type/Color custom fields has been increased from 200 to 500.

  • Excel cases export enhanced to show full folder hierarchy in Folder field.

  • BDD/Gherkin cases: Copy Steps and Duplicate Steps options added.

  • Jira Panel - Execution Summary screen enhanced to show Case Title.

  • Multi cycle Execution Detail report enhancements:

    • Case and Run RTF fields (Case Description, Case Precondition & Multi line text Custom Fields) have been added to the column selector.
      Note: Attachments (if any) for above fields will not be shown.

    • Case key link will take user to the Run in the cycle instead of Case.

  • Public APIs Enhancements:

    • Get Cycle Summary API enhanced to show Total Runs count.

    • Upload and Attach attachments to Cycle RTF Fields API enhanced to attach attachments in the Objective and RTF custom fields.

    • Get Cycle Details API enhanced to fetch Attachments associated with cycle (Cycle, Objective and RTF Custom fields).

Minor Bug Fixes

  • Cycle creation issue from Jira panel.

  • Issue with Cycle load having a huge total Actual effort value.

  • New Line issue after a parameter name.

  • Text wrapping issue for long parameter values.

23rd December, 2023 → Cloud: v4.5

New Features

  • Run Step assignments: Users will now be able to assign users at step level.

    • Note: Run step assignments can be controlled at Project level and Case level.

  • Import automation results using Robot Framework is also supported now.

  • New API has been introduced for importing automation results as a batch process.

Enhancements

  • Select List custom fields limit increase: Allowed list values limit for Single/Multi select list type/Color custom fields has been increased from 200 to 500.

Minor Bug Fixes

  • Cycle creation issue from Jira panel.

  • Issue with Cycle load having a huge total Actual effort value.

2nd December, 2023 → Cloud: v4.4.4

New Features

  • Folder Permissions: New Project Level Permissions added for Folders Creation/Renaming/Move/Deletion.

  • New APIs:

Enhancements

  • Excel cases export enhanced to show full folder hierarchy in Folder field.

  • BDD/Gherkin cases: Copy Steps and Duplicate Steps options added.

  • Jira Panel - Execution Summary screen enhanced to show Case Title.

  • Multi cycle Execution Detail report enhancements:

    • Case and Run RTF fields (Case Description, Case Precondition & Multi line text Custom Fields) have been added to the column selector.
      Note: Attachments (if any) for above fields will not be shown.

    • Case key link will take user to the Run in the cycle instead of Case.

  • Public APIs Enhancements:

    • Get Cycle Summary API enhanced to show Total Runs count.

    • Upload and Attach attachments to Cycle RTF Fields API enhanced to attach attachments in the Objective and RTF custom fields.

    • Get Cycle Details API enhanced to fetch Attachments associated with cycle (Cycle, Objective and RTF Custom fields).

Minor Bug Fixes

  • New Line issue after a parameter name.

  • Text wrapping issue for long parameter values.

28th November, 2023 → Server: v4.4.3, Data Center: v:4.4.3.0

New Features

  • My Work: Recently Accessed section on Overview page has now been renamed to ‘My Work’ and Cycles tab has been enhanced to enable users to see more information about the cycles they are working on or recently worked on.

    • The activity trends are now clubbed at the top and users have the option to collapse them

  • Execution Status Highlight options: Users will now be able to choose different colors to be set for different execution statuses.

  • Bulk Edit Sets and Cycles: Users will now be able to Bulk Edit Sets and Cycles in addition to other bulk actions.

  • Language Support: AIO Tests now supports French and German language.

Enhancements

  • Re-order Columns: Users will be now able to choose display order of columns for different Entities via Order option in Column selector.

  • PDF Export enhancements: PDF export of cases has been enhanced to preserve Rich Text Formatting and show attachments as links.

  • Edit Parameter Names: Users will now be able to edit parameter names for Data parametrized cases.

  • A new button ‘Collapse All Runs’ has been introduced on Cycles Execution tab to collapse all expanded runs in one go.

  • Users will now be able to Export Preconditions and Estimated effort as well while Exporting Steps and update the same while Importing Edited steps.

  • Single / Multi-select and Color custom fields will be alphabetically sorted for the following reports - Case distribution, Automation coverage, Execution distribution, Run distribution.

  • Support options clubbed together: Help and settings menu option on top right on Overview page have been re-arranged for better accessibility.

  • Title for cases will now show as wrapped up for longer titles.

Minor Bug Fixes

  • Users can now right-click and open the top navigation bar options in new tabs

  • Notifications will show up for unsaved comments on Case detail view

  • Incorrect handling of empty data set values while importing results

  • Linked steps to be collapsed by default on Cycles Execution

  • Scroll bar issue for Case steps screen

19th November, 2023 → Cloud: v4.4.3

Enhancements

  • AI Assistant - BETA: OpenAI model upgrade for better performance.

Minor Bug Fixes

  • Linked steps to be collapsed by default on Cycles Execution.

  • Scroll bar issue for Case steps screen.

  • Few AI fixes.

4th November, 2023 → Cloud: v4.4.2

New Features

  • AI Assistant - BETA: AI integration with AIO Tests has been introduced which will enable users to generate sample test cases with help of AI.

  • My Work: Recently Accessed section on Overview page has now been renamed to ‘My Work’ and Cycles tab has been enhanced to enable users to see more information about the cycles they are working on or recently worked on.

    • The activity trends are now clubbed at the top and users have the option to collapse them

  • Execution Status Highlight options: Users will now be able to choose different colors to be set for different execution statuses.

  • Bulk Edit Sets and Cycles: Users will now be able to Bulk Edit Sets and Cycles in addition to other bulk actions

  • Language Support: AIO Tests now supports French and German language

Enhancements

  • Re-order Columns: Users will be now able to choose display order of columns for different Entities via Order option in Column selector.

  • PDF Export enhancements: PDF export of cases has been enhanced to preserve Rich Text Formatting and show attachments as links.

  • Edit Parameter Names: Users will now be able to edit parameter names for Data parametrized cases.

  • A new button ‘Collapse All Runs’ has been introduced on Cycles Execution tab to collapse all expanded runs in one go.

  • Users will now be able to Export Preconditions and Estimated effort as well while Exporting Steps and update the same while Importing Edited steps.

  • Single / Multi-select and Color custom fields will be alphabetically sorted for the following reports - Case distribution, Automation coverage, Execution distribution, Run distribution

  • Support options clubbed together: Help and settings menu option on top right on Overview page have been re-arranged for better accessibility.

  • Title for cases will now show as wrapped up for longer titles.

Minor Bug Fixes

  • Users can now right-click and open the top navigation bar options in new tabs.

  • Notifications will show up for unsaved comments on Case detail view

  • Incorrect handling of empty data set values while importing results.

23rd October, 2023 → Server: v4.4.1, Data Center: v:4.4.1.0

New Features

  • Archive Cases/Cycles - User will now be able to mark Cases and Cycles as Archived and also Unarchive/Delete them as required.

  • Double Delete Confirmation - Users will now be able to delete cases, which are associated in current project’s set and cycles, in a single go after confirmation from user.

  • Run distribution report - A new report has been added to enable users to do analysis of Runs by grouping on different Case / Cycle & Run attributes as well as Run custom fields.

  • Failed step info in Jira Panel - User will now have the ability to view the steps of the failed case along with attachments and defects information in Jira Panel.

Enhancements

  • Custom fields type enhancements:

    • A new Custom field type Color Selector has been introduced.

    • Following Jira custom field types are also supported now:

      • Radio buttons for Select List (Single)

      • Checkboxes and Select List (multiple choices)

  • Closed/Locked cycle enhancements on Cycles Listing Grid:

    • A new Column and filter ‘Closed Date’ have been added to view/filter on Closed Date of Cycles.

    • A new column ‘Closed’ has been added to view Closed status of Cycles.

    • A new column ‘Locked’ has been added to view Locked status of Cycles.

  • Deselect All in Copy Cycle/Set - Users will now be able to Deselect All cases in one go which get added to cycle/set in Copy Cycle/Set flow.

  • Defects/Actual effort mandatory enhancements - Enhancements have been done to improve the experience for changing Run status in Cycle when Actual Effort or Defects are marked mandatory for them.

  • API enhancements- Public API’s have been enhanced to support Archived Cases/Cycles and Closed Cycle features.

23rd September, 2023 → Cloud: v4.4.1

New Features

  • Archive Cases/Cycles - User will now be able to mark Cases and Cycles as Archived and also Unarchive/Delete them as required.

  • Double Delete Confirmation - Users will now be able to delete cases, which are associated in current project’s set and cycles, in a single go after confirmation from user.

  • Run distribution report - A new report has been added to enable users to do analysis of Runs by grouping on different Case / Cycle & Run attributes as well as Run custom fields.

  • Failed step info in Jira Panel - User will now have the ability to view the steps of the failed case along with attachments and defects information in Jira Panel.

Enhancements

  • Custom fields type enhancements:

    • A new Custom field type Color Selector has been introduced.

    • Following Jira custom field types are also supported now:

      • Radio buttons for Select List (Single)

      • Checkboxes and Select List (multiple choices)

  • Closed/Locked cycle enhancements on Cycles Listing Grid:

    • A new Column and filter ‘Closed Date’ have been added to view/filter on Closed Date of Cycles.

    • A new column ‘Closed’ has been added to view Closed status of Cycles.

    • A new column ‘Locked’ has been added to view Locked status of Cycles.

  • Deselect All in Copy Cycle/Set - Users will now be able to Deselect All cases in one go which get added to cycle/set in Copy Cycle/Set flow.

  • Defects/Actual effort mandatory enhancements - Enhancements have been done to improve the experience for changing Run status in Cycle when Actual Effort or Defects are marked mandatory for them.

  • API enhancements- Public API’s have been enhanced to support Archived Cases/Cycles and Closed Cycle features.

4th September, 2023 → Server: v4.4.0, Data Center: v4.4.0.0

New Features

  • Dark Theme: Users can now use Dark theme with AIO Tests via My Settings → Theme page

  • Drill-down Capabilities in Reports/Gadgets: Automation Coverage, Execution Burndown, Execution Summary (single/multi-cycle), Execution Distribution, Traceability Summary and Case Distribution reports and related gadgets now have links on key numbers and summary cards

  • New Gadgets added: Automation Coverage and Automation Burndown

  • Cycle PDF Export: Users will now be able to Export Cycle Run/Execution data in PDF format

  • Public API’s added: Delete single run from a cycle and Delete multiple older runs from a cycle

Enhancements

  • Multi-cycle Execution Detail report: The report now has support for custom fields (case/cycle/run) along with a new filters bar and the ability to save column selection as part of saved reports. The cycle grouping (when more than 1 cycle is selected) will show the cycle fields specified.

  • Column selections in all grids: Column selections for custom fields will now be project specific and will be saved as users move between different projects

  • Run Custom Fields: Custom fields are now supported in Execute Offline also

  • BDD/Gherkin: Existing cases can be updated via ‘Import Feature Files’ option along with creation of new cases

  • Run Custom Fields: Run Custom fields are now supported in APIs also

  • Import automation Results: Users will now be able to create Data Parametrized cases via TestNG/Junit as well

Minor Bug Fixes

  • Special characters handled for Datasets

  • Issue with Run Statuses not getting Copied for Defects mandatory and Actual Effort while Import settings has been fixed

6th August, 2023 → Cloud: v4.4.0

New Features

Enhancements

  • Run Custom Fields: Run Custom fields are now supported in APIs also

  • Import automation Results: Users will now be able to create Data Parametrized cases via TestNG/Junit as well

Minor Bug Fixes

  • Issue with Run Statuses not getting Copied for Defects mandatory and Actual Effort while Import settings has been fixed

9th July, 2023 → Cloud: v4.3.2

New Features

  • Dark Theme: Users can now use Dark theme with AIO Tests via My Settings → Theme page

  • Drill-down Capabilities in Reports/Gadgets: Automation Coverage, Execution Burndown, Execution Summary (single/multi-cycle), Execution Distribution, Traceability Summary and Case Distribution reports and related gadgets now have links on key numbers and summary cards

Enhancements

  • Run Custom Fields: Custom fields are now supported in Execute Offline also

  • BDD/Gherkin: Existing cases can be updated via ‘Import Feature Files’ option along with creation of new cases

Minor Bug Fixes

  • Special characters handled for Datasets

25th June, 2023 → Server: v4.3.0, Data Center: v4.3.0.0

New Features

  • Data Driven Cases/Scenario Outlines: Users will now be able to create Data Driven/Parameterized cases by creating Datasets for Classic Cases and Examples for BDD/Gherkin cases. Watch how to use the feature.

  • Custom Fields at Run Level: Users can now create custom fields to capture execution information like Environment, Build number, Browser, etc. and also make them mandatory. See details here on how to create them and here on how to access them

  • Case and Cycle Custom Fields support in Reports: Users can now use their case and cycle level Custom Fields in Case Distribution , Automation Coverage reports and Multi Cycle Distribution Report and Gadget.

  • New Gadgets added → Project Activity - Advanced, User Activity and Execution Distribution

  • Public APIs added Get Custom Field types , Get Custom Fields , Post comments directly to the latest run or specify a run ID against which comments needs to be posted

  • Automatically assign test cases: Not Assigned cases in a cycle will now be automatically assigned to the user executing the case when the status is changed to any non-Not Run type status.

  • Users will now have the ability to configure Actual effort and Defects as mandatory for a particular run/dataset level status via General Preferences.

  • Create Set from Cycle: Users will now have the ability to create a Set from single cycle/set of cycles.

Enhancements

  • Dynamic Filters → Users can now set filters instead of specifying specific keys of cycles in all reports which allow input of multiple cycles - both Traceability reports, multi-cycle execution summary, detail and distribution, both Automation reports as well as Case distribution report. Same is applicable for related gadgets

  • Enhanced Public APIs → Following Public APIs for Cases and Cycles now support Custom Fields → Single case/cycle, cases/cycles listing, create case/cycle, search case/cycle, Project Configuration and Traceability APIs

  • Actual Effort in Seconds: Actual effort will now capture “seconds” too

  • Close/Complete a cycle: Users will now have the ability to mark a Cycle as Closed once execution is completed and also to filter out Closed cycles using ‘Closed’ filter on Cycles listing.

  • Duplicate Step Keyboard Shortcut: A new keyboard shortcut (Ctrl +d) has been introduced as a quick way of duplicating case steps.

  • Select List custom fields limit increase: Allowed list values for Single/Multi select list type custom fields has been increased from 50 to 100.

  • Create Cycle/Add to Cycle from Sets enhancements: Create Cycle/Add to cycle options will now also be available from Bulk menu of Sets

  • Date Filters have been enhanced across the app to have more options to filter by, for example- Today/Yesterday/Last 2,7,15 Days/This and Previous Month/This and Previous Year.

  • New Filter for Case Version: A new cycle filter has been added to allow users to filter by Latest/old case version in cycle.

  • Case Distribution and Automation Coverage report: A new grouping field option “Datasets” has been added in both these reports.

  • Multi Cycle Execution Detail Report: Two new buttons ‘Expand All’ ad ‘Collapse All' have been added for users to be able to expand/collapse their cycles execution data.

  • Cucumber enhancements: Users will now be able to choose while importing automation results if they want to create each example as a separate case or a single Example Based case in AIO.

  • Automation Updates

    • While importing automation results, the corresponding cases' Automation Status would be marked as ‘Automated’

    • For cucumber import, if “bddforceupdate” is set to true, Title and description will also be updated

    • Jenkins plugin v1.8 released: while creation of new cycle, users can specify folder and Jira Tasks to be linked

Minor Bug Fixes

  • User will be able to rename a folder to same name with different letter-case(capitalization).

  • Copying links from different tabs of Cycle/Set will now re-direct users to whichever tab the link was copied from.

11th June 2023 → Cloud: v4.3.1

Enhancements

  • Multi-cycle Execution Detail report: The report now has support for custom fields (case/cycle/run) along with a new filters bar and the ability to save column selection as part of saved reports. The cycle grouping (when more than 1 cycle is selected) will show the cycle fields specified.

  • Column selections in all grids: Column selections for custom fields will now be project specific and will be saved as users move between different projects

4th June 2023 → Cloud: v4.3.0

New Features

  • Automatically assign test cases: Not Assigned cases in a cycle will now be automatically assigned to the user executing the case when the status is changed to any non-Not Run type status.

  • Public API added - Post comments directly to the latest run or specify a run ID against which comments needs to be posted

  • Custom Fields support in Reports/Gadgets: Users can now use their case and cycle level Custom Fields in Multi Cycle Distribution Report and Gadget.

  • Users will now have the ability to configure Actual effort and Defects as mandatory for a particular run/dataset level status via General Preferences.

  • Create Set from Cycle: Users will now have the ability to create a Set from single cycle/set of cycles.

Enhancements

  • Cucumber enhancements: Users will now be able to choose while importing automation results if they want to create each example as a separate case or a single Example Based case in AIO.

  • Case Distribution and Automation Coverage report: A new grouping field option “Datasets” has been added in both these reports.

  • Multi Cycle Execution Detail Report: Two new buttons ‘Expand All’ ad ‘Collapse All' have been added for users to be able to expand/collapse their cycles execution data.

  • Date Filters have been enhanced across the app to have more options to filter by, for example- Today/Yesterday/Last 2,7,15 Days/This and Previous Month/This and Previous Year.

  • New Filter for Case Version: A new cycle filter has been added to allow users to filter by Latest/old case version in cycle.

  • Create Cycle/Add to Cycle from Sets enhancements: Create Cycle/Add to cycle options will now also be available from Bulk menu of Sets.

Minor Bug Fixes

  • Issues with duplicating a case step using shortcut ctrl+b have been fixed. New changed shortcut is ctrl+d.

21st May 2023 → Cloud: v4.2.0

New Features

  • Data Driven Cases/Scenario Outlines: Users will now be able to create Data Driven/Parameterized cases by creating Datasets for Classic Cases and Examples for BDD/Gherkin cases. Watch how to use the feature.

Enhancements

  • Close/Complete a cycle: Users will now have the ability to mark a Cycle as Closed once execution is completed and also to filter out Closed cycles using ‘Closed’ filter on Cycles listing.

  • Duplicate Step Keyboard Shortcut: A new keyboard shortcut (Ctrl +b) has been introduced as a quick way of duplicating case steps.

  • Select List custom fields limit increase: Allowed list values for Single/Multi select list type custom fields has been increased from 50 to 100.

Minor Bug Fixes

  • User will be able to rename a folder to same name with different letter-case(capitalization).

  • Copying links from different tabs of Cycle/Set will now re-direct users to whichever tab the link was copied from.

30th April, 2023 → Cloud: v4.1.2

New Features

  • Case and Cycle Custom Fields support in Reports: Users can now use their case and cycle level Custom Fields in Case Distribution and Automation Coverage reports

Enhancements

  • Actual Effort in Seconds: Actual effort will now capture “seconds” too

  • Notifications for User Custom Fields on Runs: If users create single-user or multi-user custom fields for Runs, they can now also decide if they wish to send notifications on these fields.

23rd April, 2023 → Cloud: v4.1.1

New Features

  • Custom Fields at Run Level: Users can now create custom fields to capture execution information like Environment, Build number, Browser, etc. and also make them mandatory. See details here on how to create them and here on how to access them

  • New Gadgets added → Project Activity - Advanced, User Activity and Execution Distribution

  • Public APIs added Get Custom Field types and Get Custom Fields

Enhancements

  • Dynamic Filters → Users can now set filters instead of specifying specific keys of cycles in all reports which allow input of multiple cycles - both Traceability reports, multi-cycle execution summary, detail and distribution, both Automation reports as well as Case distribution report. Same is applicable for related gadgets

  • Enhanced Public APIs → Following Public APIs for Cases and Cycles now support Custom Fields → Single case/cycle, cases/cycles listing, create case/cycle, search case/cycle, Project Configuration and Traceability APIs

  • Automation Updates

    • While importing automation results, the corresponding cases' Automation Status would be marked as ‘Automated’

    • For cucumber import, if “bddforceupdate” is set to true, Title and description will also be updated

    • Jenkins plugin v1.8 released: while creation of new cycle, users can specify folder and Jira Tasks to be linked

18th April, 2023 → Server: v4.1.0, Data Center: v4.1.0.0

New Features

  • Notifications on User Custom Fields: Users can now choose to send an email notification when creating User custom fields

  • Bulk copy of Cycles: Users can now copy multiple cycles within the project

  • AIO Tests Jira Panel visibility options: The ability to control the visibility of AIO Tests panel on Jira issues has been added

  • Tags on Saved Reports: The ability to categorize reports via Tags has been added allowing users to organize their saved reports

  • Public APIs added:

    • Get and Create Folder hierarchy for Cases and Cycles

    • Ability to upload attachments to Cases and Cycles

    • Export BDD cases

    • Ability to retrieve attachments

Enhancements

  • Users now have the ability to mark Jira Requirements as mandatory on Cases

  • Jira Tasks field is now available in Cycle tab Filters and Column Selector allowing users to see which Cycles are linked to Jira issues

  • Users can now upload attachments on Cycle too

  • Cases Count has been added as an option in the column selector for Sets

  • Public APIs enhanced

    • Create cycle API updated to take Jira Tasks as input and link them to the created cycle

    • Search Cycle API updated to allow search via linked Jira Task list

    • Search Case API updated to allow search via linked Jira Requirement list

    • Migration API updated to take migrate Assignees and Jira Defects

9th April, 2023 → Cloud: v4.1.0.1

Enhancements

  • Multi-Cycle Execution Detail Report: The Execution Detail report now supports input of multiple cycles. The name of the report is changed to reflect the same. With multiple cycles, user can choose to change the grouping to “None” to see the order in which cases were in the cycle.

29th March, 2023 → Server: v4.0.3, Data Center: v4.0.3.0

Video introducing all the changeshttps://youtu.be/MR5kMIWxo0I

Enhancements

  • Create button - Create Case/Set/Cycle button has moved to the main navigation bar allowing users to create entities from any screen

  • Set Detail view now has 2 tabs: Details and Cases. Details tab shows the basic information and Cases tab shows the Cases added to the set

  • Cycle Detail view now has 3 tabs: - Details, Cases and Execution. Details tab shows the basic information, Cases tab shows the cases added to the cycle and Execution tab allows users to execute cases like before

  • An icon next to the case in Cycles will show if the latest version is not present in the cycle

  • Apart from Bulk User Assignments, users can assign cases from the grid of cases in Cases and Execution tabs of the Cycle

  • Linked cases screen has been enhanced to have added ability of filtering the cases and expanding and viewing case steps

  • Add to Set/Cycle from Cases screens have been enhanced for more flexibility and ease of use

  • Classic to BDD cases and vice-versa conversion is supported now even if cases to be converted are existing in a cycle already. Only exception being when case is already referenced in any other case, in that case it can’t be converted

  • The folder panel throughout the app is resizable now

  • Jira Custom fields: New Jira custom fields creation has been simplified as a new type 'Jira field' is added to Custom field types. Going forward, for creating new Jira custom fields, users don't need to select 'Single Select List' as type for creating the same

  • AIO Project Admins: Project permissions have a new option added for 'Edit Project Settings' allowing Admins to add QA users as AIO Tests admin for Project Settings page

  • Jira panel:

    • Overall AIO tests issue panel has been enhanced for more flexibility and ease of use

    • Link cases option has been enhanced to have added ability of filtering the cases

    • Quick Execute of cases can now be done across projects

  • Overview page: Cases/Sets/Cycles boxes are now clickable enabling the user to navigate to respective entities

  • Export cases to Feature file: Cases will now be sorted by case ID in the exported file

Minor Bug Fixes

  • Newman handle path issue and import failure issue has been fixed

  • Issue with display/search of User groups on Access page has been fixed

  • Clicking on Cycle key link from Jira panel will now open Executions tab by default

  • BDD case creation/editing/saving experience has been improved

  • Special characters handling updated while importing BDD cases from Excel

25th March 2023 → Cloud: v4.1.0

New Features

  • Notifications on User Custom Fields: Users can now choose to send an email notification when creating User custom fields

  • Bulk copy of Cycles: Users can now copy multiple cycles within the project

  • AIO Tests Jira Panel visibility options: The ability to control the visibility of AIO Tests panel on Jira issues has been added

  • Tags on Saved Reports: The ability to categorize reports via Tags has been added allowing users to organize their saved reports

  • Public APIs added:

    • Get and Create Folder hierarchy for Cases and Cycles

    • Ability to upload attachments to Cases and Cycles

    • Export BDD cases

    • Ability to retrieve attachments

Enhancements

  • Users now have the ability to mark Jira Requirements as mandatory on Cases

  • Jira Tasks field is now available in Cycle tab Filters and Column Selector allowing users to see which Cycles are linked to Jira issues

  • Users can now upload attachments on Cycle too

  • Cases Count has been added as an option in the column selector for Sets

  • Public APIs enhanced

    • Create cycle API updated to take Jira Tasks as input and link them to the created cycle

    • Search Cycle API updated to allow search via linked Jira Task list

    • Search Case API updated to allow search via linked Jira Requirement list

    • Migration API updated to take migrate Assignees and Jira Defects

11th March 2023 → Cloud: v4.0.3

Minor Bug Fixes

  • Special characters handling updated while importing BDD cases from Excel

  • Folder context issue while editing a case has been fixed

  • Issues with steps re-ordering fixed

5th March 2023 → Cloud: v4.0.2

Minor Bug Fixes

  • The default status will be Published while creating case from Jira panel instead of Draft

  • Clicking on Cycle key link from Jira panel will now open Executions tab by default

  • Long text input for Steps page has been handled

  • BDD case creation/editing/saving experience has been improved

26th February, 2023 → Cloud: v4.0.1

Enhancements

  • Overview page: Cases/Sets/Cycles boxes are now clickable enabling the user to navigate to respective entities

  • Export cases to Feature file: Cases will now be sorted by case ID in the exported file

Minor Bug Fixes

  • Cases selection while doing ‘Add All’ in Reports Filters has been fixed

  • Newman handle path issue and import failure issue has been fixed

  • Issue with display/search of User groups on Access page has been fixed

  • Issue with Step level attachments not getting attached while creating an issue has been fixed

  • Issue with browser back button while navigating back from Jira issue has been fixed

  • AIO Tests pages now utilize entire screen when page is resized

23rd February, 2023 → Server: v3.1.7, Data Center: v3.1.7.0

Enhancements

  • Cycle Details: Pre-conditions (if populated) for a test case will now be shown for every run of the case

  • Search Case API has been enhanced to support search by case priority, type, status and owner

  • Multi Cycle Distribution Report has been enhanced to also show defects discovered column

  • Cucumber enhancements have been done to handle cases where data is parameterized in data tables

19th February, 2023 → Cloud: v4.0

Enhancements

  • Create button - Create Case/Set/Cycle button has moved to the main navigation bar allowing users to create entities from any screen

  • Set Detail view now has 2 tabs: Details and Cases. Details tab shows the basic information and Cases tab shows the Cases added to the set

  • Cycle Detail view now has 3 tabs: - Details, Cases and Execution. Details tab shows the basic information, Cases tab shows the cases added to the cycle and Execution tab allows users to execute cases like before

  • An icon next to the case in Cycles will show if the latest version is not present in the cycle

  • Apart from Bulk User Assignments, users can assign cases from the grid of cases in Cases and Execution tabs of the Cycle

  • Classic to BDD cases and vice-versa conversion is supported now even if cases to be converted are existing in a cycle already. Only exception being when case is already referenced in any other case, in that case it can’t be converted

  • The folder panel throughout the app is resizable now

  • Jira Custom fields: New Jira custom fields creation has been simplified as a new type 'Jira field' has been added to Custom field types. Going forward, for creating new Jira custom fields, users don't need to select 'Single Select List' as type for creating the same

  • AIO Project Admins: Project permissions have a new option added for 'Edit Project Settings' allowing Admins to add QA users as AIO Tests admin for Project Settings page

  • Jira panel:

    • Overall AIO tests issue panel has been enhanced for more flexibility and ease of use

    • Link cases option has been enhanced to have added ability of filtering the cases

    • Quick Execute of cases can now be done across projects

  • Linked cases screen has been enhanced to have added ability of filtering the cases and expanding and viewing case steps

  • Add to Set/Cycle from Cases screens have been enhanced for more flexibility and ease of use

  • Click here to have a high level look on some of the main changes mentioned above

Known Issues (Fix coming on 26th Feb)

  • Reports Filters add all issue - Add all functionality in Reports is not adding all eligible cases, currently it is selecting the number of cases as selected in pagination preference. To add more cases, pagination limit can be increased or additional cases can be selected manually

4th December, 2022 → Cloud: v3.1.5.4

Enhancements

  • Cycle Details: Pre-conditions (if populated) for a test case will now be shown for every run of the case

  • Search Case API has been enhanced to support search by case priority, type, status and owner

20th November, 2022 → Cloud: v3.1.5.3

Enhancements

  • Multi Cycle Distribution Report has been enhanced to also show defects discovered column

  • Cucumber enhancements have been done to handle cases where data is parameterized in data tables

2nd November, 2022 → Server: v3.1.6, Data Center: v3.1.6.0

Enhancements

  • Folder hierarchy for cases/sets/cycles will now be maintained and displayed as per user preference across sessions

  • Copy Steps: A checkbox has been added to allow users to select all steps while copying steps from other cases

  • CSV export now supports Unicode characters/fonts

  • Traceability reports/gadgets have been enhanced to highlight Failed Status cases for better visibility

  • Cucumber enhancements have been done to add log to run comments and description to new cases being created

30th October, 2022 → Cloud: v3.1.5.2

Enhancements

  • Folder hierarchy for cases/sets/cycles will now be maintained and displayed as per user preference across sessions

  • Copy Steps: A checkbox has been added to allow users to select all steps while copying steps from other cases

  • CSV export now supports Unicode characters/fonts

  • Traceability reports/gadgets have been enhanced to highlight Failed Status cases for better visibility

  • Cucumber enhancements have been done to add log to run comments and description to new cases being created

20th October, 2022 → Server: v3.1.5, Data Center: v3.1.5.0

New Features

  • User activity report: A new report has been added for users to be able to see Cases added/updated/executed/automated per user in different projects

  • Project Activity report: A new report has been added for users to be able to track activities in a project

  • Postman tests import via Newman Report: Users will now be able to import their Postman tests results (via Newman) into AIO Tests. Detailed documentation here

  • Public filters: Users will now be able to mark their Saved filters as Public/Private thereby allowing other users to subscribe to and use public filters

Enhancements

  • Rich-Text Format Updates: Users can now insert tables, attachments and code snippets in Steps, data, expected results as well as Case Description, Actual Results, Comments etc.

    • Note: Images attached in Case Description, Steps, Data, Expected results, Actual result, RTF custom fields, etc. for Test run or Test Steps will not be included while creating issues/sub-tasks at run/step level

  • Cucumber Enhancements:

    • AIO Tests now supports doc strings and data tables while importing Cucumber results as well as while importing feature files

    • Embeddings to be supported without name while importing Cucumber results

    • Steps with no text will be ignored while importing Cucumber results

  • Export of BDD cases will now show keywords in separate column

  • Traceability summary report: Report has been enhanced to include defects from all runs in a cycle

  • Traceability reports/gadgets: Traceability reports and gadgets have been enhanced to give users the ability to filter child issues based on issue type

  • Case history will now also capture records for files attached at case level as well as case steps level while creating a new case/editing a case

  • Case Search API enhanced to search via automation status

  • RTF attachment links in Jira issues: Issue creation screen from AIO Tests will now also include links for any case level/step level/run level/run step level/RTF attachments (added in comments/actual results, etc.)

  • Comment attachments in email notifications: Attachments present in comments will now be sent as links in email notifications

Minor Bug Fixes

  • Fix for Background information being lost from Cucumber reports import

  • Fix for both automation key and case key cases matching and being updated while importing Cucumber results

  • Minor fix for data to be shown properly in RTF tables while creating an issue

9th October, 2022 → Cloud: v3.1.5

Enhancements

  • Traceability reports/gadgets: Traceability reports and gadgets have been enhanced to give users the ability to filter child issues based on issue type

2nd October, 2022 → Cloud: v3.1.4

New Features

  • User activity report: A new report has been added for users to be able to see Cases added/updated/executed/automated per user in different projects

  • Project Activity report: A new report has been added for users to be able to track activities in a project

  • Postman tests import via Newman Report: Users will now be able to import their Postman tests results (via Newman) into AIO Tests. Detailed documentation here

  • Public filters: Users will now be able to mark their Saved filters as Public/Private thereby allowing other users to subscribe to and use Public filters

Enhancements

  • RTF attachment links in Jira issues: Issue creation screen from AIO Tests will now also include links for any case level/step level/run level/run step level/RTF attachments (added in comments/actual results, etc.)

  • Comment attachments in email notifications: Attachments present in comments will now be sent as links in email notifications

Minor Bug Fixes

  • Minor fix for data to be shown properly in RTF tables while creating an issue

18th September, 2022 → Cloud: v3.1.3

Enhancements

  • Rich-Text Format Updates: Users can now insert tables, attachments and code snippets in Steps, data, expected results as well as Case Description, Actual Results, Comments etc.

    • Note: Images attached in Case Description, Steps, Data, Expected results, Actual result, RTF custom fields, etc. for Test run or Test Steps will not be included while creating issues/sub-tasks at run/step level

  • Cucumber Enhancements:

    • AIO Tests now supports doc strings and data tables while importing Cucumber results as well as while importing feature files

    • Embeddings to be supported without name while importing Cucumber results

    • Steps with no text will be ignored while importing Cucumber results

  • Export of BDD cases will now show keywords in separate column

  • Traceability summary report: Report has been enhanced to include defects from all runs in a cycle

  • Case history will now also capture records for files attached at case level as well as case steps level while creating a new case/editing a case

  • Case Search API enhanced to search via automation status

     

Minor Bug Fixes

  • Fix for Background information being lost from Cucumber reports import

  • Fix for both automation key and case key cases matching and being updated while importing Cucumber results

7th September, 2022 → Server: v3.1.2, Data Center: v3.1.2.0

New Features

  • Custom column selector in Jira view of AIO Tests: For the Cases tab in AIO Tests section on a Jira issue view, users can now choose which columns they would like to see.

  • Re-indexing of Case Keys: Users can ensure the case keys are in order if a few cases have been deleted and they would like to see no gaps in the numbering of keys

Enhancements

  • Advanced Search: Users can now search in Steps, Description and Comments in addition to keys, title and automation keys

  • Bulk Export of Cases: Users can now export cases to Excel/CSV/PDF and Feature Files from Bulk Selection too (existing functionality of exporting cases via filters is also there)

  • Execution Distribution report - Report has been enhanced to take multiple cycles as input and show data for them

  • Defect Summary gadget - An option has been added to Defect summary gadget to ask for Jira fields to generate the pie graphs

  • Execution overview gadget - Enhancements done to extend the graph to take full space if only 1 graph is selected

  • Traceability Summary Report - Report has been enhanced to show status as ‘Not in cycle' instead of ‘No Run’ for cases not present in cycle

  • Email Enhancements: Users will now get email notifications from AIO Tests without requiring to set the profile visibility to Anyone

Minor Bug Fixes

  • Fixed - Accented letters showing up as "?" in email content

  • Fixed - Navigational issues

21st August, 2022 → Cloud: v3.1.2

New Features

  • Custom column selector in Jira view of AIO Tests: For the Cases tab in AIO Tests section on a Jira issue view, users can now choose which columns they would like to see.

  • Re-indexing of Case Keys: Users can ensure the case keys are in order if a few cases have been deleted and they would like to see no gaps in the numbering of keys

Enhancements

  • Advanced Search: Users can now search in Steps, Description and Comments in addition to keys, title and automation keys

  • Bulk Export of Cases: Users can now export cases to Excel/CSV/PDF and Feature Files from Bulk Selection too (existing functionality of exporting cases via filters is also there)

Minor Bug Fixes

  • Fixed: - Accented letters showing up as "?" in email content

5th August, 2022 → Server: v3.1.0, Data Center: v3.1.0.0

New Features

  • Custom Statuses for Executions: Users can now create new statuses for executions

  • Project Settings:  Users can control/define if the failed status is considered as execution completed or not

  • Sub-task Creation as defect: When creating issues/defects from AIO, users will be able to create sub-tasks to stories in addition to defects

  • Copy Sets: Users can now copy sets also

  • NUnit Support: NUnit results can now be directly imported in AIO Tests.

Enhancements

  • Users can now insert links in Steps, data, expected results as well as Case Description, Actual Results, Comments, etc.

  • Multi-cycle execution summary graphs will show the title of the cycle

  • Existing Comments will be exported in Execute Offline

  • Email Enhancements

    • Comments will be included in the outgoing emails

    • Case title has been added to the emails going out for assignment of Case Owner, Automation Owner and when cases are assigned to testers in cycles

  • While copying a case/set/cycle, default Owner will now be the user performing the copy action instead of original owner of that entity

Minor Bug fixes

  • For cases with longer title, the tooltip will show the entire title while copying steps from other cases as well as while linking cases

  • Gadget message updated to reflect correct report name

1st August, 2022 → Cloud: v3.1.1

Enhancements

  • Execution Distribution report - Report has been enhanced to take multiple cycles as input and show data for them

  • Defect Summary gadget - An option has been added to Defect summary gadget to ask for Jira fields to generate the pie graphs

  • Execution overview gadget - Enhancements done to extend the graph to take full space if only 1 graph is selected

  • Traceability Summary Report - Report has been enhanced to show status as ‘Not in cycle' instead of ‘No Run’ for cases not present in cycle

  • Email Enhancements: Users will now get email notifications from AIO Tests without requiring to set the profile visibility to Anyone

24th July, 2022 → Cloud: v3.1.0

New Features

  • Custom Statuses for Executions: Users can now create new statuses for executions

  • Project Settings:  Users can control/define if the failed status is considered as execution completed or not

  • Sub-task Creation as defect: When creating issues/defects from AIO, users will be able to create sub-tasks to stories in addition to defects

  • Copy Sets: Users can now copy sets also

  • NUnit Support: NUnit results can now be directly imported in AIO Tests.

Enhancements

  • Users can now insert links in Steps, data, expected results as well as Case Description, Actual Results, Comments, etc.

  • Multi-cycle execution summary graphs will show the title of the cycle

  • Existing Comments will be exported in Execute Offline

  • Email Enhancements

    • Comments will be included in the outgoing emails

    • Case title has been added to the emails going out for assignment of Case Owner, Automation Owner and when cases are assigned to testers in cycles

  • While copying a case/set/cycle, default Owner will now be the user performing the copy action instead of original owner of that entity

Minor Bug fixes

  • For cases with longer title, the tooltip will show the entire title while copying steps from other cases as well as while linking cases

  • Gadget message updated to reflect correct report name

22nd July, 2022 → Server: v3.0.4, Data Center: v3.0.4.0

New Features

  • Jira 9 compatibility: AIO Tests is now compatible with Jira Server version 9.x

8th July, 2022 → Server: v3.0.2, Data Center: v3.0.2.0

New Features

  • AIO Tests Server To Cloud Data migration: Jira Server users using AIO Tests can now move their data to Jira Cloud using AIO Tests JCMA feature. Details available here

  • Create set/Add to set from Cases: Users can now create a set from Cases tab for selected cases or add cases to an existing set from the Cases tab as well as from Jira panel

  • Add more details to Defect Description while creating defects from AIO Tests (General Preferences)

    • Cycle details and Cycle custom fields

    • Actual Result, Data and Expected Results
      Note: Steps will now be displayed in a table for better readability

  • Expected Results field can be marked as non-mandatory: From Field Configurations, users can now mark "Expected Results" field as a non-mandatory field
    Note: Expected Results field cannot be disabled

  • New API’s exposed and existing API’s updated to allow the users to update a test case run at step level. Click here to check out the API

  • Delete Cycle API released: Users can use it for first deleting cases from a cycle and then deleting the cycle by passing ‘emptyCycleBeforeDelete’ flag as true. Click here to check out the API

  • Create Case API released: A new ‘Create Case’ API has been released to allow users to create a case with basic case details, Automation details and link Jira requirements. Click here to check out the API

Enhancements

  • Cases Grid Performance Enhancements: To increase the performance of cases listing, following changes have been made:

    • Filters updated to include Apply & Clear All icons: A tick icon (for applying filters) has been added and will need to be clicked once the filters are selected. A "X" icon (for clearing filters) has also been added
      Note: These buttons will only appear for Cases listing and Add existing cases page for Sets & Cycles

    • Key Filter: Instead of showing the entire list of keys, the key filter can be applied by searching for the keys

    • Adding Cases to Set/Cycle: While creating/adding cases to Set/Cycle from Cases folders, only cases matching the applied filter, if any, will be added

    • Search Enhancements: Performance enhancements have been done for Search on Cases Listing

  • Bulk Status Update Performance Improvement: Bulk status change call has been updated to improve speed

  • Copy Cycle Performance Improvement: Copy Cycle feature has been updated to improve speed

  • Defect Pie Graphs enhanced - Users can now customize the Defect Pie Graphs in the Single and Multi Cycle Execution Summary reports via ‘Report Preferences’ section under Project Settings

  • Show Previously Added Cases on Add cases screen: Users can see previously added cases in a set/cycle using this option. The option is available while creating/editing set/cycle and while adding existing cases to a set/cycle

  • Case Search API Enhancements: Case Search API has been enhanced to support search by Automation key as well. Click here to check out the API

Minor Bug fixes

  • Fix for Custom fields not getting copied while Copying a cycle

  • Fix for issues with step level status changes on Cycle Details

  • Fix for create case modal opening from Jira panel even though no fields are marked as mandatory

  • Fix for PDF export of cases having Unicode characters

  • Fix for empty space that was being shown on Create Set screen

  • Fix for spinner issue on Sets/cycles listing if saved filter for set/cycle is deleted from Add to Set/Add to Cycle screen

  • Fix for issues with case steps being copied in bug being created from run/step level

3rd July, 2022 → Cloud: v3.0.2

Enhancements

  • Cases Listing Search Enhancements: Performance enhancements have been done for Search on Cases Listing.

Minor Bug fixes

  • Fix for spinner issue on Sets/cycles listing if saved filter for set/cycle is deleted from Add to Set/Add to Cycle screen

26th June, 2022 → Cloud: v3.0.1

New Features

  • Create Case API released: A new ‘Create Case’ API has been released to allow users to create a case with basic case details, Automation details and link Jira requirements. Click here to check out the API

Enhancements

  • Case Search API Enhancements: Case Search API has been enhanced to support search by Automation key as well. Click here to check out the API

Minor Bug fixes

  • Fix for issues with step level status changes on Cycle Details

  • Fix for create case modal opening from Jira panel even though no fields are marked as mandatory

19th June, 2022 → Cloud: v3.0

New Features

  • Add more details to Defect Description while creating defects from AIO Tests (General Preferences)

    • Cycle details and Cycle custom fields

    • Actual Result, Data and Expected Results
      Note: Steps will now be displayed in a table for better readability

  • Expected Results field can be marked as non-mandatory: From Field Configurations, users can now mark "Expected Results" field as a non-mandatory field
    Note: Expected Results field cannot be disabled

  • Delete Cycle API released: Users can use it for first deleting cases from a cycle and then deleting the cycle by passing ‘emptyCycleBeforeDelete’ flag as true. Click here to check out the API.

Enhancements

  • Cases Grid Performance Enhancements: To increase the performance of cases listing, following changes have been made:

    • Filters updated to include Apply & Clear All icons: A tick icon (for applying filters) has been added and will need to be clicked once the filters are selected. A "X" icon (for clearing filters) has also been added
      Note: These buttons will only appear for Cases listing and Add existing cases page for Sets & Cycles

    • Key Filter: Instead of showing the entire list of keys, the key filter can be applied by searching for the keys

    • Adding Cases to Set/Cycle: While creating/adding cases to Set/Cycle from Cases folders, only cases matching the applied filter, if any, will be added.

  • Show Previously Added Cases on Add cases screen: Users can see previously added cases in a set/cycle using this option. The option is available while creating/editing set/cycle and while adding existing cases to a set/cycle

Minor Bug fixes

  • Fix for PDF export of cases having Unicode characters.

  • Fix for Custom fields not getting copied while Copying a cycle.

5th June, 2022 → Cloud: v2.9.2

Enhancements

  • Defect Pie Graphs enhanced - Users can now customize the Defect Pie Graphs in the Single and Multi Cycle Execution Summary reports via ‘Report Preferences’ section under Project Settings.

21st May, 2022 → Cloud: v2.9.1

New Features

Enhancements

  • Bulk Status Update Performance Improvement: Bulk status change call has been updated to improve speed.

  • Copy Cycle Performance Improvement: Copy Cycle feature has been updated to improve speed.

Minor Bug fixes

  • Fix for empty space that was being shown on Create Set screen.

17th May, 2022 → Server: v2.9.0, Data Center: v2.9.0.0

New Features

  • Case Distribution Report: A new Case level report has been added to AIO Tests that shows distribution of cases in a matrix format using configurable groupings of case attributes.

  • Defect Impact Report: A new report has been added to AIO Tests that will help users to analyze the impact of Defects on Cases and Requirements. Users can choose to see runs from current as well other projects. For more details, click here

  • Jira Custom Fields: Users can now create Custom fields in AIO Tests which can be mapped to single select custom fields and Sprint fields in Jira. Once created, Jira custom fields will work the same way across the app as other AIO Custom fields. For more details, click here

  • Email notifications for Case Assignee and Automation Owner: Users will now receive emails(if preferences are set appropriately) whenever they are assigned a case or assigned as Automation owner for a case, except for the cases where the user is assigning themselves. For more details, click here.

Enhancements

  • Create Another Case: Users can now use the “Create Another” checkbox while creating cases to keep creating cases one after the other. The case details from the first case gets copied into the next one along with steps, if selected

  • BDD Cases import via Excel: Users can now import BDD cases with an Excel format as well. They will be required to map the “BDD Keyword” field

  • Delete Selected Steps: The delete button has been moved out from the ellipsis on the Steps page allowing users to quickly select the steps that need to be deleted

  • Bulk Status Update & Bulk Assign Users Performance Improvement: Both these bulk calls have been updated to improve speed

  • Copy Cycle Performance Improvement: Copy Cycle feature has been updated to improve speed

  • Public API exposed to attach artifacts to latest run of the case: Public API has been exposed to attach artifacts to the latest run of the case in absence of run ID.

Minor Bug fixes

  • Fix for cases getting scrolled up on cycle details while typing in comments.

  • Fix for excel export failure if any cell has very long data which exceeds allowed characters limit.

8th May, 2022 → Cloud: v2.9

New Features

  • Jira Custom Fields: Users can now create Custom fields in AIO Tests which can be mapped to single select custom fields and Sprint fields in Jira. Once created, Jira custom fields will work the same way across the app as other AIO Custom fields. For more details, click here

  • Defect Impact Report: A new report has been added to AIO Tests that will help users to analyze the impact of Defects on Cases and Requirements. Users can choose to see runs from current as well other projects. For more details, click here.

  • Email notifications for Case Assignee and Automation Owner: Users will now receive emails(if preferences are set appropriately) whenever they are assigned a case or assigned as Automation owner for a case, except for the cases where the user is assigning themselves. For more details, click here.

Enhancements

  • Public API exposed to attach artifacts to latest run of the case: Public API has been exposed to attach artifacts to the latest run of the case in absence of run ID.

Minor Bug fixes

  • Fix for excel export failure if any cell has very long data which exceeds allowed characters limit.

  • Fix for fetching the correct issue hierarchy in reports if Epic Issue Type is renamed.

24th April, 2022 → Cloud: v2.8.3

New Features

  • Case Distribution Report: A new Case level report has been added to AIO Tests that shows distribution of cases in a matrix format using configurable groupings of case attributes

Enhancements

  • Create Another Case: Users can now use the “Create Another” checkbox while creating cases to keep creating cases one after the other. The case details from the first case gets copied into the next one along with steps, if selected

  • BDD Cases import via Excel: Users can now import BDD cases with an Excel format as well. They will be required to map the “Keyword” field

  • Delete Selected Steps: The delete button has been moved out from the ellipsis on the Steps page allowing users to quickly select the steps that need to be deleted

  • Bulk Status Update & Bulk Assign Users Performance Improvement: Both these bulk calls have been updated to improve speed

  • Copy Cycle Performance Improvement: Copy Cycle feature has been updated to improve speed

18th April, 2022 → Server: v2.8.2, Data Center: v2.8.2.0

New Features

  • Mandatory/Non-mandatory fields: Users can enable/disable and mark a host of fields as mandatory with this new feature. It can be accessed via the Field Configurations page under Project Settings. The option is also available for Custom fields.

  • Copy Project Settings: The ability to copy the project level settings from a project to multiple other projects has been added to AIO Tests. Users can also import project settings of another project into the current project that they're working on

  • Save Filters: Users can now save their filter combinations and reuse them in reports

Enhancements

  • Search in Folders: Users can now search for a particular folder in the folder structure on Cases, Sets and Cycles tab

  • Find & Replace in Steps: A new option has been introduced for the Steps page so that users can find and replace words in steps page quickly. This feature is currently only available for classic cases

  • Delete All Steps: Use the Delete All steps option when you clone cases but steps need to be different. This feature is currently only available for classic cases

  • "_" (underscore) is now supported while mapping keys via automation in JUnit

10th April, 2022 → Cloud: v2.8.2

Enhancements

  • Search in Folders: Users can now search for a particular folder in the folder structure on Cases, Sets and Cycles tab

  • Find & Replace in Steps: A new option has been introduced for the Steps page so that users can find and replace words in steps page quickly. This feature is currently only available for classic cases

  • Delete All Steps: Use the Delete All steps option when you clone cases but steps need to be different. This feature is currently only available for classic cases

3rd April, 2022 → Cloud: v2.8.1

New Features

  • Mandatory/Non-mandatory fields: Users can enable/disable and mark a host of fields as mandatory with this new feature. It can be accessed via the Field Configurations page under Project Settings. The option is also available for Custom fields.

  • Copy Project Settings: The ability to copy the project level settings from a project to multiple other projects has been added to AIO Tests. Users can also import project settings of another project into the current project that they're working on

  • Save Filters: Users can now save their filter combinations and reuse them in reports

Enhancements

  • "_" (underscore) is now supported while mapping keys via automation in JUnit

27th March, 2022 → Server: v2.7.2, Data Center: v2.7.2.0

New Features

  • Operation Level Permissions: Admin now have a new project level setting which lets them specify detailed access on operations like creation, deletion, execution, etc. of different entities. Read more details here

  • Bulk Copy Cases to Another Project and Same Project : Users can now copy cases across projects and within projects too. Copying cases from another project is available under Import Cases button and should be initiated from the destination project. Copying cases to the same project is available under Bulk Edit (pencil icon)

  • Lock Cycle Scope: Users can now lock cycle so that no more cases can be added or removed. This is useful in scenarios when managers do not want anyone to add/remove cases once the cycle is created. The option is available from Cycle Details page under Manage Cases button

  • Audit Log: Audit Log is a new option under the cog icon. It shows a list of all deletion activities for the project for up to 30 days

Enhancements

  • Rich text boxes now maintain selections on clicking outside

Minor Bug fixes

  • Firefox issue with drag and drop of entities into folders and reorder of cases in Cycle details page

  • Edit case from cycle fixed to fetch latest version when user input changed from new run to existing run

14th March, 2022 → Server: v2.7.0, Data Center: v2.7.0.0

New Features

  • Custom Statuses for Cases: Users can now customize the case statuses to suit their organizational process. New statuses can be added, existing ones can be renamed/deleted and their behavior can be modified. Click here for more details.

  • New Gadgets: Four (4) new gadgets have been released with this update - Execution Overview, Defect Summary, Traceability Summary & Traceability Detail.

13th March, 2022 → Cloud: v2.8

New Features

  • Operation Level Permissions: Admin now have a new project level setting which lets them specify detailed access on operations like creation, deletion, execution, etc. of different entities. Read more details here

  • Bulk Copy Cases to Another Project and Same Project : Users can now copy cases across projects and within projects too. Copying cases from another project is available under Import Cases button and should be initiated from the destination project. Copying cases to the same project is available under Bulk Edit (pencil icon)

  • Lock Cycle Scope: Users can now lock cycle so that no more cases can be added or removed. This is useful in scenarios when managers do not want anyone to add/remove cases once the cycle is created. The option is available from Cycle Details page under Manage Cases button

  • Audit Log: Audit Log is a new option under the cog icon. It shows a list of all deletion activities for the project for up to 30 days

Enhancements

  • Rich text boxes now maintain selections on clicking outside

27th February, 2022 → Cloud: v2.7.1

Minor Bug fixes

  • Firefox issue with drag and drop of entities into folders and reorder of cases in Cycle details page

  • Edit case from cycle fixed to fetch latest version when user input changed from new run to existing run

22nd February, 2022 → Server: v2.6.0, Data Center: v2.6.0.0

New Features

  • Bulk Add Runs in Cycle: Users can now add runs to multiple cases using the “Bulk add runs” option added to “Manage Cases” button in the Cycle Detail page

  • General Preferences - Default Issue Type Selection with Configurable Defect Description: Users can now specify the default issue type to be used while creating defects from AIO Tests. They can also specify AIO fields that should be part of the description of the defect being created. This option is available from Settings cog icon → Project Settings → General Preferences

Enhancements

  • Edit Title & Status from Grid: The ability to edit title and status from the grid has been added to Cases grid. The status can also be updated from the case’s right hand panel. The status and title can also be updated from the cases grid in AIO Tests Jira panel

  • JQL option for Requirement Filter: Users can now use a JQL in the Requirement Filter to find the cases associated with them. This can help users while creating sets and cycles, ensuring cases linked to all the specified requirements are added to the set/cycle

  • Updated Cycle Details Page: Based on inputs from multiple customers, the cycle details page has been updated to utilize space more efficiently. A video explaining the changes is available from the app too. Here is the link to the video. The documentation too has been updated to reflect the changes

  • Document Type allowed: .wav extension has now been added to acceptable list of documents while uploading

Minor Bug fixes

  • Tab key functioning reinstated while creating/adding steps

  • Sort by Priority fixed on cycle details page

  • Grouping by sets in cycle details page when filters are applied is fixed now

  • Folder expand/collapse on creation of new sub-folder fixed

20th February, 2022 → Cloud: v2.7

New Features

  • Custom Statuses for Cases: Users can now customize the case statuses to suit their organizational process. New statuses can be added, existing ones can be renamed/deleted and their behavior can be modified. Click here for more details.

  • New Gadgets: Four (4) new gadgets have been released with this update - Execution Overview, Defect Summary, Traceability Summary & Traceability Detail.

8th February, 2022 → Server: v2.5.2, Data Center: v2.5.2.0

New Features

  • Actual Effort Timer: Users can now use timer to calculate actual effort automatically. Timer is available on each run and is also displayed on the top of the app. For more details, click here

  • Email notifications: The ability to tag users is now available for AIO Tests. Tagged users will get an email notification if preferences are set appropriately. For details, click here

  • My Settings: The AIO Tests email notifications preferences and API token generation option has moved under ‘My Settings’. These settings are specific to the logged in user

  • Public Reports: Users can now create and share reports with all the project team members thus making them publicly available. Already saved reports can also be made public. Each team member will see the public report in their “Shared Reports” section under the Reports tab. Click here for details

Enhancements

  • Jira fields for Reports: The defect table in Execution Summary and Multi-Cycle Execution reports is now customizable. Users can add fields from Jira in the table and see bug relevant data

  • Grouping in Cycles: A new icon in Cycle Details page allows users to group cases by Folders and Sets. This will allow users to navigate cases in a more organized way

  • Grouping in Reports: Execution Summary and Execution Detail reports have a new grouping option - Sets

  • Refresh button in all Reports: All reports now have a new option at the top - Refresh. This allows users to refresh the report without going to Input screen or refreshing the entire app

Minor Bug Fixes

  • Custom field related fixes while exporting cases and while on cycle details page

6th February, 2022 → Cloud: v2.6

New Features

  • General Preferences - Default Issue Type Selection with Configurable Defect Description: Users can now specify the default issue type to be used while creating defects from AIO Tests. They can also specify AIO fields that should be part of the description of the defect being created. This option is available from Settings cog icon → Project Settings → General Preferences

Enhancements

  • Updated Cycle Details Page: Based on inputs from multiple customers, the cycle details page has been updated to utilize space more efficiently. A video explaining the changes is available from the app too. Here is the link to the video. The documentation too has been updated to reflect the changes

  • Document Type allowed: .wav extension has now been added to acceptable list of documents while uploading

Minor Bugs

  • Sort by Priority fixed on cycle details page

  • Grouping by sets in cycle details page when filters are applied is fixed now

  • Folder expand/collapse on creation of new sub-folder fixed

23rd January, 2022 → Cloud: v2.5.2

New Features

  • Bulk Add Runs in Cycle: Users can now add runs to multiple cases using the “Bulk add runs” option added to “Manage Cases” button in the Cycle Detail page

Enhancements

  • Edit Title & Status from Grid: The ability to edit title and status from the grid has been added to Cases grid. The status can also be updated from the case’s right hand panel. The status and title can also be updated from the cases grid in AIO Tests Jira panel

  • JQL option for Requirement Filter: Users can now use a JQL in the Requirement Filter to find the cases associated with them. This can help users while creating sets and cycles, ensuring cases linked to all the specified requirements are added to the set/cycle

Minor Bug fixes

  • Tab key functioning reinstated while creating/adding steps

16th January, 2022 → Cloud: v2.5.1

New Features

  • Public Reports: Users can now create and share reports with all the project team members thus making them publicly available. Already saved reports can also be made public. Each team member will see the public report in their “Shared Reports” section under the Reports tab. Click here for details

Minor Bug Fixes

  • Actual effort timer related minor fixes for cross project support

9th January, 2022 → Cloud: v2.5

New Features

  • Actual Effort Timer: Users can now use timer to calculate actual effort automatically. Timer is available on each run and is also displayed on the top of the app. For more details, click here

  • Email notifications: The ability to tag users is now available for AIO Tests. Tagged users will get an email notification if preferences are set appropriately. For details, click here

  • My Settings: The AIO Tests email notifications preferences and API token generation option has moved under ‘My Settings’. These settings are specific to the logged in user

Enhancements

  • Jira fields for Reports: The defect table in Execution Summary and Multi-Cycle Execution reports is now customizable. Users can add fields from Jira in the table and see bug relevant data

  • Grouping in Cycles: A new icon in Cycle Details page allows users to group cases by Folders and Sets. This will allow users to navigate cases in a more organized way

  • Grouping in Reports: Execution Summary and Execution Detail reports have a new grouping option - Sets

  • Refresh button in all Reports: All reports now have a new option at the top - Refresh. This allows users to refresh the report without going to Input screen or refreshing the entire app

22nd December, 2021 → Server: v2.4.0, Data Center: v2.4.0.0

New Features

  • Automation Coverage Report: The new report shows automation coverage of cases by different parameters - Automation Owner, Case Priority, Sets, Cycles, etc.

  • Automation Burndown report: See how many cases are getting automated over a period of time (monthly, quarterly, etc.) along with saved manual effort. Cases can be specified in a variety of ways

  • Cypress Integration with AIO: AIO Tests now supports direct reporting from Cypress, with it’s cypress-aiotests-reporter npm package -> https://www.npmjs.com/package/cypress-aiotests-reporter

  • Cases Export to PDF: Users can export AIO Tests cases to PDF along with Excel & CSV

Enhancements

  • Folder Panel Updates: When in a folder, users can now click on the new icon (next to search magnifying glass) to see cases/sets/cycles of the child folders as well

  • Folder Panel Performance: There are performance enhancements for Folder implementation across the app

  • Folder Filter updates: The folder filter has been further enhanced to not only include the child folders on select of the parent folder, but also show the hierarchy helping users see which folders have been selected

  • New Cucumber keyword support: Cucumber support extended for new keyword - star *

  • New Public API released: users can now attach files to runs

  • New Public API released: New API to bulk update status of multiple runs in one go has been added to the list of available public APIs

  • Column Selector icon: Icon for adding/removing columns updated

Minor Bug Fixes

  • Linked step title will now be shown in Cycle details page

  • Created date now shown on Jobs tab for Import Edited Steps

19th December, 2021 → Cloud: v2.4.2

Enhancements

  • Increased Document Size Limits: The size of attachments has been increased to 100 MB and for import of “cucumber.json” result files, limit has been raised to 300MB

  • Case Title on Edit/View Steps modals: The title of the case has been added to all View Steps modal and the Edit Steps modal throughout the app making it easier to know which case the user is working on

12th December, 2021 → Cloud: v2.4

New Features

  • Automation Burndown report: See how many cases are getting automated over a period of time (monthly, quarterly, etc.) along with saved manual effort. Cases can be specified in a variety of ways

Enhancements

  • Folder Panel Updates: When in a folder, users can now click on the new icon (next to search magnifying glass) to see cases/sets/cycles of the child folders as well

  • Folder Panel Performance: There are performance enhancements for Folder implementation across the app

  • New filter options for Traceability & Automation Reports: Users now have the option to filter the issue list by Project & Issue Type while specifying Requirements in the Traceability as well as Automation reports

Minor Bug Fixes

  • Linked step title will now be shown in Cycle details page

  • Created date now shown on Jobs tab for Import Edited Steps

5th December, 2021 → Cloud: v2.3.1

New Features

Enhancements

  • New Public API Released: New API to bulk update status of multiple runs in one go has been added to the list of available public APIs

2nd December, 2021 → Server: v2.2.1, Data Center: v2.2.1.0

New Features

  • Ability to Export & Import Errored Out cases while importing New Cases using Excel/CSV: While importing new cases, users now have the ability to export the errored out cases, fix them and reimport only the error cases. For cases created with SUCCESS_WITH_ERRORS status, new cases will not be created. The already created cases will be updated with the changes imported with the updated Excel

  • Folder Filters Updated: When users select a folder in the Folder filter anywhere in the app, if the folder has child folders, the child folders also get automatically selected

Enhancements

  • Ability to View Steps from Quick Execute Screen: Users can now also view steps from the Quick Execute screen making it easier for users to check the steps before executing the case

  • Ability to Sort Cases & Cycles in the Recently Accessed section: Users can now sort on all available columns in the Cases & Cycles tab in the Recently Accessed section on the Overview tab

  • Owner added as a default column for Cycles: Owner is now available as one of the default columns on the Cycles tab. If users have already added this tab from Custom Columns, then there will be no change for them. New users will see the Owner column by default

  • Ability to filter Enabled projects in the top project dropdown: Users now have the ability to see either all the Jira projects or only Enabled projects in the top project drop-down

  • Expand Button for Text Boxes: The expand button available for editing text boxes in the Steps page has now been moved inside the bottom Rich Text bar

28th November, 2021 → Cloud: v2.3

New Features

  • Zephyr Scale migration (Cloud) migration to AIO Tests Cloud: Users can now seamlessly and on a click of a button migrate their test cases from Zephyr Scale Cloud to AIO Tests Cloud for any project

  • Cases Export to PDF: Users can export AIO Tests cases to PDF along with Excel & CSV

Enhancements

  • New Cucumber keyword support: Cucumber support extended for new keyword - star *

  • New public API released: users can now attach files to runs

  • Column Selector icon: Icon for adding/removing columns updated

21st November, 2021 → Cloud: v2.2.2

New Features

  • Automation Coverage Report: The new report shows automation coverage of cases by different parameters - Automation Owner, Case Priority, Sets, Cycles, etc.

Enhancements

  • Folder Filter updates: The folder filter has been further enhanced to not only include the child folders on select of the parent folder, but also show the hierarchy helping users see which folders have been selected

 

14th November, 2021 → Cloud: v2.2.1

Enhancements

  • Folder Filters Updated: When users select a folder in the Folder filter anywhere in the app, if the folder has child folders, the child folders also get automatically selected

7th November, 2021 → Cloud: v2.2

New Features

  • Ability to Export & Import Errored Out cases while importing New Cases using Excel/CSV: While importing new cases, users now have the ability to export the errored out cases, fix them and reimport only the error cases. For cases created with SUCCESS_WITH_ERRORS status, new cases will not be created. The already created cases will be updated with the changes imported with the updated Excel

Enhancements

  • Ability to View Steps from Quick Execute Screen: Users can now also view steps from the Quick Execute screen making it easier for users to check the steps before executing the case

  • Ability to Sort Cases & Cycles in the Recently Accessed section: Users can now sort on all available columns in the Cases & Cycles tab in the Recently Accessed section on the Overview tab

  • Owner added as a default column for Cycles: Owner is now available as one of the default columns on the Cycles tab. If users have already added this tab from Custom Columns, then there will be no change for them. New users will see the Owner column by default

  • Ability to filter Enabled projects in the top project dropdown: Users now have the ability to see either all the Jira projects or only Enabled projects in the top project drop-down

  • Expand Button for Text Boxes: The expand button available for editing text boxes in the Steps page has now been moved inside the bottom Rich Text bar

7th November, 2021 → Server: v2.1.3, Data Center: v2.1.3.0

Enhancements

  • Cycle Detail Page Updates: AIO Tests has introduced multiple features on Cycle Detail page to enhance its working. The top bar is now interactable.

    • The user icons in the top bar are now clickable (user icons show which users are working in the cycle). The click filters RTF the list below and shows cases assigned to the clicked user

    • The statuses are also clickable. The click filters the list below and shows cases in the clicked status

    • The cases listing now shows the assigned user icon in the grid itself

  • Performance Enhancements: We have introduced improvements that will enhance the performance of cycles listing page

  • RTF box placement Updated: The Rich Text Format (RTF) bar has been moved to the bottom of the editable box to avoid the entire text box being moved down when clicked

  • New File Types added for Attachments: .sas and .pcap file types are now supported

  • New Public APIs available: Public APIs for searching cases and for migrating back dated Test Runs have been added

  • Updated Single Cycle Execution Summary Report: Added Percentages in summary section

  • Updated Multi Cycle Execution Summary Report: Added Percentages & Open Defect count in the summary section

Bug Fixes

  • JUnit import fix for cases being imported from other projects where project name is substring of mapped key

  • Corrected messaging for cases where user doesn’t have access while importing Cucumber results

24th October, 2021 → Cloud: v2.1.3

Enhancements

  • Cycle Detail Page Updates: AIO Tests has introduced multiple features on Cycle Detail page to enhance its working. The top bar is now interactable.

    • The user icons in the top bar are now clickable (user icons show which users are working in the cycle). The click filters the list below and shows cases assigned to the clicked user

    • The statuses are also clickable. The click filters the list below and shows cases in the clicked status

    • The cases listing now shows the assigned user icon in the grid itself

  • Performance Enhancements: We have introduced improvements that will enhance the performance of cycles listing page

  • RTF box placement Updated: The Rich Text Format (RTF) bar has been moved to the bottom of the editable box to avoid the entire text box being moved down when clicked

  • New File Types added for Attachments: .sas and .pcap file types are now supported

Bug Fixes

  • JUnit import fix for cases being imported from other projects where project name is substring of mapped key

  • Corrected messaging for cases where user doesn’t have access while importing Cucumber results

20th October, 2021 → Server: v2.1.1, Data Center: v2.1.1.0

New Features

  • Cross Project Linking: AIO Tests has enabled cross-project linking of cases for various scenarios in the app

    • Cases can be linked as steps in other projects

    • Cases can be added into cycles of other projects for execution

    • Cases can be added to sets of other projects

    • Single cycle execution reports will show cases of other projects if they have been executed in the specified cycle

    • Traceability reports will show cases details of execution across projects

    • Cycles can be created from AIO Tests Jira panel that consists of cases from multiple projects

    • Cases from different projects added in a cycle can be exported for offline execution

    • Users can import automation results for cases from different projects in a cycle

  • Bell icon added: A new bell icon has been added to the top right corner of the application. The icon will be utilized to let users know about app updates, announcements, etc.

Enhancements

  • Edit Case from Cycle Details: Users can now edit a case from cycle details screen itself. A icon to edit has been introduced near the key which is visible on hover over the row of the case. The click of the icon will show the edit case window

  • Merge case updates to the latest run: On update of the case from cycle details screen, the users will get the option to either merge the updates with the existing, latest run or create a new run with the new changes

  • Search projects with Key: Projects can be searched now via their Jira project key in the project drop-down on top of the application

  • PDF Export hierarchy: PDF reports enhanced with visibility into hierarchy

  • Import Folder Structure: Users can now import their folder structure along with test cases from other systems or Excel/CSV files. Hierarchies among folders are also supported

17th October, 2021 → Cloud: v2.1.2

Enhancements

  • New Public APIs available: Public APIs for searching cases and for migrating back dated Test Runs have been added

  • Updated Single Cycle Execution Summary Report: Added Percentages in summary section

  • Updated Multi Cycle Execution Summary Report: Added Percentages & Open Defect count in the summary section

10th October, 2021 → Cloud: v2.1.1

Enhancements

  • Import Folder Structure: Users can now import their folder structure along with test cases from other systems or Excel/CSV files. Hierarchies among folders are also supported

Minor Bug Fixes

  • Save Steps button fix for cross-project cases when editing a case from cycle creates a new version

  • Estimated effort on Sets right panel fixed for inaccessible cross-project cases

  • Sort on Priority field in Set Details page fixed

  • Execute offline fix for projects with disabled fields

3rd October, 2021 → Cloud: v2.1

New Features

  • Cross Project Linking: AIO Tests has enabled cross-project linking of cases for various scenarios in the app

    • Cases can be linked as steps in other projects

    • Cases can be added into cycles of other projects for execution

    • Cases can be added to sets of other projects

    • Single cycle execution reports will show cases of other projects if they have been executed in the specified cycle

    • Traceability reports will show cases details of execution across projects

    • Cycles can be created from AIO Tests Jira panel that consists of cases from multiple projects

    • Cases from different projects added in a cycle can be exported for offline execution

    • Users can import automation results for cases from different projects in a cycle

Enhancements

  • Search projects with Key: Projects can be searched now via their Jira project key in the project drop-down on top of the application

  • PDF Export hierarchy: PDF reports enhanced with visibility into hierarchy

12th September, 2021 → Cloud: v2.0.5

New Features

  • Bell icon added: A new bell icon has been added to the top right corner of the application. The icon will be utilized to let users know about app updates, announcements, etc.

Enhancements

  • Edit Case from Cycle Details: Users can now edit a case from cycle details screen itself. A icon to edit has been introduced near the key which is visible on hover over the row of the case. The click of the icon will show the edit case window

  • Merge case updates to the latest run: On update of the case from cycle details screen, the users will get the option to either merge the updates with the existing, latest run or create a new run with the new changes

5th September, 2021 → Server: v2.0.4, Data Center: v2.0.4.0

New Features

  • View Steps from Jira Panel: Users can now view/edit steps from Jira panel through the Steps icon (icon visible on hover over)

  • Directly Share Case Details, Steps and other pages: The “Copy Case” link on case details page will copy the tab the user is on. This gives the users the ability to share each tab of Case details separately. So clicking on copy case link from Steps page will copy the link of the Steps page of the case.

Enhancements

  • Search ability in Project Dropdown: The project drop-down in the top navigation bar, now has a search text box to easily search for projects and switch AIO Tests for the same

  • Aggregated Defects list on Run panel: The Defects tab on the right panel for the Run will show defects associated with the steps also (read only mode)

Minor Bug Fixes

  • Mismatch in defect numbers in Jira panel and cycle details fixed

  • Clicking on URL type custom field will open URL in new window

  • Number filter fixed to handle 0s

29th August, 2021 → Server: v2.0.3, Data Center: v2.0.3.0

New Features

  • PDF Export for Reports: PDF Export for reports is now available along with Excel. Hierarchy in Traceability reports is shown via colored rows for children

  • Attachments at Steps Level: Users can now attach documents/images at each step in a Case. They can be viewed from Sets and Cycles too

  • Import & Export of Custom Fields: Custom fields can now be imported and exported

Enhancements

  • New Filter: Custom field of type Number can now be included in Filters

  • Edit Steps from Cases listing: Users can now Edit Steps right from the cases listing by clicking on the icon next to case key (appears on hover over)

  • Import Functionality Update: Now users don't have to map data for fields that have 1-1 mapping with data in AIO Tests. For example, if users have priorities defined in their Excel/CSV which map to the ones available in AIO Tests, then while importing if they aren’t mapped in the Data Mapping step, the values will be automatically imported

Bug Fixes

  • While importing multiple Jira requirements/story ids for a case, if one of the requirements doesn't map to Jira issue, the others will still be imported and mapped

  • Import job was hanging if a wrong type of feature file was being uploaded. Now it will throw an error and the job status will be shown as a proper error

28th August, 2021 → Cloud: v2.0.4

New Features

  • View Steps from Jira Panel: Users can now view/edit steps from Jira panel through the Steps icon (icon visible on hover over) - only available with app upgrade

  • Directly Share Case Details, Steps and other pages: The “Copy Case” link on case details page will copy the tab the user is on. This gives the users the ability to share each tab of Case details separately. So clicking on copy case link from Steps page will copy the link of the Steps page of the case.

Enhancements

  • Search ability in Project Dropdown: The project drop-down in the top navigation bar, now has a search text box to easily search for projects and switch AIO Tests for the same

  • Aggregated Defects list on Run panel: The Defects tab on the right panel for the Run will show defects associated with the steps also (read only mode)

Minor Bug Fixes

  • Mismatch in defect numbers in Jira panel and cycle details fixed

  • Clicking on URL type custom field will open URL in new window

  • Number filter fixed to handle 0s

23rd August, 2021 → Cloud: v2.0.3

New Features

  • PDF Export for Reports: PDF Export for reports is now available along with Excel. Hierarchy in Traceability reports is shown via colored rows for children

  • Attachments at Steps Level: Users can now attach documents/images at each step in a Case. They can be viewed from Sets and Cycles too

  • Import & Export of Custom Fields: Custom fields can now be imported and exported

Enhancements

  • New Filter: Custom field of type Number can now be included in Filters

  • Edit Steps from Cases listing: Users can now Edit Steps right from the cases listing by clicking on the icon next to case key (appears on hover over)

  • Import Functionality Update: Now users don't have to map data for fields that have 1-1 mapping with data in AIO Tests. For example, if users have priorities defined in their Excel/CSV which map to the ones available in AIO Tests, then while importing if they aren’t mapped in the Data Mapping step, the values will be automatically imported

Bug Fixes

  • While importing multiple Jira requirements/story ids for a case, if one of the requirements doesn't map to Jira issue, the others will still be imported and mapped

  • Import job was hanging if a wrong type of feature file was being uploaded. Now it will throw an error and the job status will be shown as a proper error

19th August, 2021 → Server: v2.0.2, Data Center: v2.0.2.0

Enhancements

Improved MSSQL compatibility

8th August, 2021 → Server: v2.0.1, Data Center: v2.0.1.0

New Features

  • Custom Fields: Users can now add custom fields to track granular level details specific to their organization

Enhancements

  • Jira Panel - Last Run Status Added on Cases tab: AIO Tests Jira panel has a new look. Users can now see and change the case execution status in the last created run along with linked defects details. This addition gives user a complete view of the story in regards to testing from the Jira panel itself

  • Jira Panel - Status change from Impacted Executions tab: Users can now change the status of the case in the impacted cycles right from the panel by clicking on the status icon

  • Jira Panel - Optimized space utilization: The Jira panel has been optimized to take less space when no cases/cycles are linked to it. Even after linking, the space utilized is in accordance with the information presented

  • Jira Requirements added in Column Selector: A new option - “Jira Requirements” has been added in the column selector for Cases

Minor Bug Fixes

  • Fixed the creation of cycle from Jira panel after a case has been created

  • Minor UI fixes including tool tip fixes

  • Pop-out option for attachments is now fixed

8th August, 2021 → Cloud: v2.0.1

Enhancements

  • Jira Requirements added in Column Selector: A new option - “Jira Requirements” has been added in the column selector for Cases

Minor Bug Fixes

  • Fixed the creation of cycle from Jira panel after a case has been created

  • Minor UI fixes including tool tip fixes

  • Pop-out option for attachments is now fixed

1st August, 2021 → Cloud: v2.0

New Features

  • Custom Fields: Users can now add custom fields to track granular level details specific to their organization

Enhancements

  • Jira Panel - Last Run Status Added on Cases tab: AIO Tests Jira panel has a new look. Users can now see and change the case execution status in the last created run along with linked defects details. This addition gives user a complete view of the story in regards to testing from the Jira panel itself

  • Jira Panel - Status change from Impacted Executions tab: Users can now change the status of the case in the impacted cycles right from the panel by clicking on the status icon

  • Jira Panel - Optimized space utilization: The Jira panel has been optimized to take less space when no cases/cycles are linked to it. Even after linking, the space utilized is in accordance with the information presented

28th June, 2021 → Server: v1.12, v1.12.1, v1.12.2 & Data Center: v1.12.0, v.1.12.1.0, v1.12.2.0

New Features

  • Execution History Report: A new execution cycle report that shows history of all runs of all cases in the cycle along with details of defects reported in each run

  • Export BDD cases as Feature Files: Users can now export their BDD cases as Feature Files

Enhancements

  • New Attachment types supported: .yaml, .feature, .zip and .rar are the newly supported document formats supported for attachments

  • Import Feature Files Error Handling: Detailed handling for BOM & UTF-8 feature files and specific error messages to help users

Minor Bug fixes

  • Folder links issue on refresh fixed

  • Steps page expand and resize issue fixed

  • Minor server bug fixes

20th June, 2021 → Cloud: v1.12

New Features

  • Execution History Report: A new execution cycle report that shows history of all runs of all cases in the cycle along with details of defects reported in each run

  • Export BDD cases as Feature Files: Users can now export their BDD cases as Feature Files

Enhancements

  • New Attachment types supported: .yaml, .feature, .zip and .rar are the newly supported document formats supported for attachments

  • Import Feature Files Error Handling: Detailed handling for BOM & UTF-8 feature files and specific error messages to help users

Minor Bug fixes

  • Folder links issue on refresh fixed

  • Steps page expand and resize issue fixed

5th June, 2021 → Server: v1.11 & Data Center: v1.11.0

New Features

  • Public REST API support added: Users can now use Public APIs to get and post data

  • Spanish language support: For users who have their Jira preference set to Spanish, will be able to view AIO Tests in Spanish

  • Customizable Columns – users can now add/remove columns in listings as per their requirement. Feature is available for Cases listing, Sets listing, Cycles listing, and cases listed within a Set

  • Defect #s in Cycle Details page: Users can now easily see the number of defects attached to a case from the Cycle details page. The link shows the defects ids with an option to view them in Jira’s issue navigator

  • Import BDD features files: Users can now import features files in AIO Tests allowing their manual BDD cases to be easily created in AIO Tests

  • Select Cases while copying Cycle – Users now have the option to specify which cases to copy while creating a copy of a cycle (remove/add based on additional filters)

  • Custom Sort – Maintain order of execution for cases in a cycle and a set by dragging and dropping

  • Group based access – Manage Apps -> AIO Tests -> Access lets Jira Admins define which Jira user groups have access to the app. Once access is removed, the users of that group will not see the app in Jira. If users belong to multiple groups and if any one group has access to the app, the user will have access to the app

Enhancements

  • Right Click on row to see Available Actions - Actions available through ellipsis in listings are now available through right click including open in new window and copy link functionalities

  • Sort icon removed – Sorting on columns has moved to the headers of each column and thus sort icon has been removed from the listings

  • Duplicate a step from above – Option to copy a step from above

  • Ability to continue editing steps while saving - Users now have the option to intermittently save their steps while staying in Edit mode (Save, Save & Close, Cancel)

  • Drag and drop to Folders – Users can now drag and drop cases, sets and cycles from one folder to another when folder menu is open

  • Created & Last Updated date - Created and last updated date is now shown in right panels for all entities

  • Play videos from Attachments: In addition to viewing images within the app by clicking the image name, users can also play attached videos in a popup instead of downloading it

  • Add cases to Existing Cycle: Users can now add cases to an existing cycle from the Cases tab as well as from Jira panel in addition to the option of creating a new cycle for selected cases

  • Step data copied while creating a new defect: If the user creates a defect from AIO Tests, the steps of the corresponding case get copied as part of the description of the defect being created. This reduces the time of defect creation for QA team

  • Associations tab shows last execution data: The Case details → Associations → Cycles tab now shows last execution data at the first look instead of clicking into additional links

  • Folder name is a link: Folder names are now displayed as links (right hand panel and case details page) taking user to the desired folder directly

  • Group based access extended to APIs: Group based access was introduced in last release. This release extends the same support via Public APIs

  • Quick Execute cases in bulk from Jira Panel: In addition to executing a single case from Jira panel, users can now select and execute multiple cases from Jira panel

  • Case Right panel in Cycle Details - Right panel of a case in a cycle now shows a message if an updated version of the case is available to be added to the cycle

  • Multi-cycle Execution Summary report – Users now have the option to add/remove all cycles after filtering on the input screen of multi-cycle execution report

  • BDD Cases Export – Export cases in Excel/CSV also exports BDD cases

  • BDD Support Extended - Import Edited steps and Execute offline now have support for BDD cases

  • Cucumber Report Import Attachments - screenshots in embeddings in failed cases in Cucumber report are now added as attachments in runs, while importing

  • Ease of Reports access – Users can generate execution detail report in addition to execution summary report from cycle details page itself

Minor Bug Fixes

  • Project name replicating issue from project drop-down is fixed

  • Create cycle from Set is now fixed

  • Filter bar issues in Cycle details page

  • Minor UI fixes

30th May, 2021 → Cloud: v1.11

New Features

  • Defect #s in Cycle Details page: Users can now easily see the number of defects attached to a case from the Cycle details page. The link shows the defects ids with an option to view them in Jira’s issue navigator

  • Import BDD features files: Users can now import features files in AIO Tests allowing their manual BDD cases to be easily created in AIO Tests

  • Spanish language support: For users who have their Jira preference set to Spanish, will be able to view AIO Tests in Spanish

Enhancements

  • Step data copied while creating a new defect: If the user creates a defect from AIO Tests, the steps of the corresponding case get copied as part of the description of the defect being created. This reduces the time of defect creation for QA team

  • Associations tab shows last execution data: The Case details → Associations → Cycles tab now shows last execution data at the first look instead of clicking into additional links

  • Folder name is a link: Folder names are now displayed as links (right hand panel and case details page) taking user to the desired folder directly

  • Add cases to Existing Cycle: Users can now add cases to an existing cycle from the Cases tab as well as from Jira panel in addition to the option of creating a new cycle for selected cases

  • Play videos from Attachments: In addition to viewing images within the app by clicking the image name, users can also play attached videos in a popup instead of downloading it

  • Group based access extended to APIs: Group based access was introduced in last release. This release extends the same support via Public APIs

  • Quick Execute cases in bulk from Jira Panel: In addition to executing a single case from Jira panel, users can now select and execute multiple cases from Jira panel

  • New Public API added: The new API returns details of all runs of all cases for a given cycle id

23rd May, 2021 → Cloud: v1.10.4

New Features

  • Customizable Columns – users can now add/remove columns in listings as per their requirement. Feature is available for Cases listing, Sets listing, Cycles listing, and cases listed within a Set

  • Select Cases while copying Cycle – Users now have the option to specify which cases to copy while creating a copy of a cycle (remove/add based on additional filters)

  • Custom Sort – Maintain order of execution for cases in a cycle and a set by dragging and dropping

  • Group based access – Manage Apps -> AIO Tests -> Access lets Jira Admins define which Jira user groups have access to the app. Once access is removed, the users of that group will not see the app in Jira. If users belong to multiple groups and if any one group has access to the app, the user will have access to the app

Enhancements

  • Duplicate a step from above – Option to copy a step from above

  • Drag and drop to Folders – Users can now drag and drop cases, sets and cycles from one folder to another when folder menu is open

  • Created & Last Updated date - Created and last updated date is now shown in right panels for all entities

  • Case Right panel in Cycle Details - Right panel of a case in a cycle now shows a message if an updated version of the case is available to be added to the cycle

  • Multi-cycle Execution Summary report – Users now have the option to add/remove all cycles after filtering on the input screen of multi-cycle execution report

  • Right Click on row to see Available Actions - Actions available through ellipsis in listings are now available through right click including open in new window and copy link functionalities

  • BDD Cases Export – Export cases in Excel/CSV also exports BDD cases

  • BDD Support Extended - Import Edited steps and Execute offline now have support for BDD cases

  • Cucumber Report Import Attachments - screenshots in embeddings in failed cases in Cucumber report are now added as attachments in runs, while importing

  • Ease of Reports access – Users can generate execution detail report in addition to execution summary report from cycle details page itself

  • Ability to continue editing steps while saving - Users now have the option to intermittently save their steps while staying in Edit mode (Save, Save & Close, Cancel)

  • Sort icon removed – Sorting on columns has moved to the headers of each column and thus sort icon has been removed from the listings

  • Public API changes - Public API resource /config/testrunstatus has been moved to /config/testrun/status

Minor Bug Fixes

  • Project name replicating issue from project drop-down is fixed

  • Create cycle from Set is now fixed

  • Filter bar issues in Cycle details page

  • Minor UI fixes

30th April, 2021 → Server: v1.10.3 & Data Center: v1.10.3.0

New Features

  • Gadgets for Jira Dashboards: You can now add 4 AIO Tests report elements to Jira Dashboards via Gadgets - Project Overview, Project Activity and Top Contributors (elements from Project Metrics report) and Execution Burndown

  • Cucumber Integration: AIO Tests has added Cucumber framework integration - create BDD cases and import Cucumber JSON results. Users can now create cases in Gherkin language (Given, When, Then & And). Users can also import their Cucumber results JSON file into AIO Tests via Import Results option from Cycles tab or using REST APIs.

Enhancements

  • Steps view from Cases listing: Users can now view steps from the right panel of a case by clicking an icon on top right. This helps users to review steps without going to the Case Details → Steps tab

  • New Video formats for Attachments: Two new video extensions are now supported for uploading attachments - .webm and .mp4

25th April, 2021 → Cloud: v1.10.3

New Features

Enhancements

  • New Public APIs added: Two new public APIs have been added. Cycles list can now be fetched along with key details like created date, updated date, start date, end date, component, release, etc. The second API gives a list of Cycles based on a search criteria. The exposed cycle criterion are Key, Title, Folder, Component, Release, Start Date and End date. Find details on our Swagger page.

  • New Video formats for Attachments: Two new video extensions are now supported for uploading attachments - .webm and .mp4

11th April, 2021 → Cloud: v1.10.2

New Features

  • Gadgets for Jira Dashboards: You can now add 4 AIO Tests report elements to Jira Dashboards via Gadgets - Project Overview, Project Activity and Top Contributors (elements from Project Metrics report) and Execution Burndown

Enhancements

  • Steps view from Cases listing: Users can now view steps from the right panel of a case by clicking an icon on top right. This helps users to review steps without going to the Case Details → Steps tab

11th April, 2021 → Server: v1.10.1 & Data Center: v1.10.1.0

New Features

  • Custom Priorities: Through Project Settings page, users can now customize the Priority field available on Cases. Users can add, edit, archive, delete and reorder the priority field values

  • Ability to Disable AIO Tests: Project and Jira Admins now have the ability to disable AIO Tests at project level. Jira Admins can also control the ability for Non-Admin users to enable AIO Tests.

  • Folders for Sets: Cases and Cycles already had a folder structure giving users the ability to organize cases and cycles. Now the folder structure with same capabilities has been introduced for easy organization of Sets also

Enhancements

  • Background and text colors for text: RTF options for text and background colors have been added

  • Date based filters for Cases, Sets, Cycles: Created and Updated date have been added as options in filters for Cases, Sets and Cycles. Run Created and Run Updated date filters are available on Cycle Details page

  • Date based filter for Execution Detail Report: “Executed on” is a new filter that has been added to the list of available filters in the Execution detail report

  • Removal of Tags from Cases through Bulk Edit: Inadvertently added tags can now be removed from cases via Bulk Edit of Cases - “Delete Tags” option

  • Preview of Attachments: Attachments can now be previewed within app by clicking on the name/icon of the document. The attachments open in a dialog box and users can navigate back and forth using arrows (before they used to open in a new window)

  • Default dates for Quick Execute via new cycle: While creating a new cycle via Quick Execute feature, the cycle start and end dates will be set to current date by default

Minor Bug Fixes

  • Not Assigned case type was getting added on addition of any case type through Project settings - fixed

  • Already formatting options for RTF are not highlighted while editing a comment - fixed

  • Estimated effort negative value error on click of Cancel is fixed

  • Bulk deletion of cycles error message fixed

  • Bulk selection reset now working post Move To action

4th April, 2021 → Cloud: v1.10.1

New Features

  • Ability to Disable AIO Tests: Project and Jira Admins now have the ability to disable AIO Tests at project level. Jira Admins can also control the ability for Non-Admin users to enable AIO Tests.

Enhancements

  • Default dates for Quick Execute via new cycle: While creating a new cycle via Quick Execute feature, the cycle start and end dates will be set to current date by default

28th March, 2021 → Cloud: v1.10

New Features

  • Custom Priorities: Through Project Settings page, users can now customize the Priority field available on Cases. Users can add, edit, archive, delete and reorder the priority field values

Minor Bug fixes

  • Estimated effort negative value error on click of Cancel is fixed

  • Bulk deletion of cycles error message fixed

  • Bulk selection reset now working post Move To action

21st March, 2021 → Cloud: v1.9.7

Enhancements

  • New Public API added: Public API returning list of linked cases and their latest run information for the specified Jira issue ID has been added. More details can be found at our Swagger page

15th March, 2021 → Cloud: v1.9.6

New Features

  • Folders for Sets: Cases and Cycles already had a folder structure giving users the ability to organize cases and cycles. Now the folder structure with same capabilities has been introduced for easy organization of Sets also

Enhancements

  • Removal of Tags from Cases through Bulk Edit: Inadvertently added tags can now be removed from cases via Bulk Edit of Cases - “Delete Tags” option

  • Preview of Attachments: Attachments can now be previewed within app by clicking on the name/icon of the document. The attachments open in a dialog box and users can navigate back and forth using arrows (before they used to open in a new window)

10th March, 2021 → Server: v1.0.8 & Data Center: v1.0.8.0

First Data Center version released. It encompasses all the features released for Server so far including Server v1.0.8.

New Features

  • Execute a single case from Jira issue - AIO Tests has added the ability to execute a case attached to a Jira issue from AIO Tests panel itself. The option is included in the ellipsis of each linked case as ‘Quick Execute’

  • See Executions of cases from Jira issue - Users can see the status of the last 3 runs for the last 5 cycles in which the case has been executed/added through the ‘Executions’ option available in the ellipsis of each linked case

  • Export/Import Cycle Run data to Excel - Users can now execute cases offline using Excel. On Cycle details page, users have an option to export the existing status in an Excel, update the excel offline with execution results and then import the updated excel back. New runs can be created for the updates coming from excel

  • Saved Reports - Users can now save reports so that they can reuse them later

  • Change project from within app - Users can now switch to AIO Tests on other projects from within AIO Tests app itself by using the project icon on top right

  • Next and Previous from Cases details page - The next and previous arrow buttons have been added to the Case details page. Users can now go to the next or the previous case from the Case details page itself instead of going back to the Cases listing page

  • Create Jira issues (defects) from AIO Tests: For the right panel of Runs and Steps, in the Defects tab, the option “or Create Jira Issue instead” is now available for Server

Enhancements

  • Estimated effort field added for importing new cases - Users can now specify estimated effort in minutes while importing cases in AIO Tests

  • Linked Cases now have right hand panel - Artifacts can now be attached at the linked case level in the right hand side panel (RHSP) in Cycle Details page (earlier artifacts could only be attached at the steps of linked cases)

  • Description field for Cases - The Cases now have a new field - “Description”. The field is available while creating, editing, bulk editing, importing and exporting cases.

  • Ability to go back while Creating Cases - While creating cases, users can navigate back to the Case Details screen from the Add Steps screen and vice versa

  • Filter cases by linked Jira stories - A new filter has been added for Cases - “Jira Requirement”. Users now have the ability to find which cases are linked to which stories and if there are cases with no requirements linked to them

  • Right click and open in new tab - In addition to the hover over icon to open a new tab, AIO Tests has also enabled open in new tab by using the widely used - right click and open in new tab option

  • Sort from column header - Users can now sort on any of the column by just clicking on the title/header of that column

  • Sticky pagination - While navigating between details page and listing, the page number is now sticky. So if the user was on page #2 of Cases listing and goes to case details or edits a case and navigates back to Cases listing, the user will still be on page 2 of cases listing

Minor Bug Fixes

  • User prompted with an error message if no cases found while exporting steps

  • Folders icon (burger icon) made more clickable if AIO Tests is opened from within a project

  • Misaligned icons while linking cases on Steps page is now fixed

  • Copy Steps modal now shows results properly if previous filters are still applied

  • 'No Steps' text shown instead of blank page for cases with no steps yet added

 

7th March, 2021 → Cloud: v1.9.5

Enhancements

  • Background and text colors for text: RTF options for text and background colors have been added

  • Date based filters for Cases, Sets, Cycles: Created and Updated date have been added as options in filters for Cases, Sets and Cycles. Run Created and Run Updated date filters are available on Cycle Details page

  • Date based filter for Execution Detail Report: “Executed on” is a new filter that has been added to the list of available filters in the Execution detail report

  • New Public APIs added: Two new public APIs have been added. One that returns the list of cases and their statuses and two that returns latest run details like status, actual effort, etc. for a particular case in a particular cycle. For details, please refer to our Swagger link

Bug Fixes

  • Not Assigned case type was getting added on addition of any case type through Project settings - fixed

  • Already formatting options for RTF are not highlighted while editing a comment - fixed

28th February, 2021 → Cloud: v1.9.4

New Features

  • Saved Reports - Users can now save reports so that they can reuse them later

  • Change project from within app - Users can now switch to AIO Tests on other projects from within AIO Tests app itself by using the project icon on top right

  • Next and Previous from Cases details page - The next and previous arrow buttons have been added to the Case details page. Users can now go to the next or the previous case from the Case details page itself instead of going back to the Cases listing page

Enhancements

  • Description field for Cases - The Cases now have a new field - “Description”. The field is available while creating, editing, bulk editing, importing and exporting cases.

  • Ability to go back while Creating Cases - While creating cases, users can navigate back to the Case Details screen from the Add Steps screen and vice versa

  • Filter cases by linked Jira stories - A new filter has been added for Cases - “Jira Requirement”. Users now have the ability to find which cases are linked to which stories and if there are cases with no requirements linked to them

  • Right click and open in new tab - In addition to the hover over icon to open a new tab, AIO Tests has also enabled open in new tab by using the widely used - right click and open in new tab option

  • Sort from column header - Users can now sort on any of the column by just clicking on the title/header of that column

  • Sticky pagination - While navigating between details page and listing, the page number is now sticky. So if the user was on page #2 of Cases listing and goes to case details or edits a case and navigates back to Cases listing, the user will still be on page 2 of cases listing

Minor Bug Fixes

  • Copy Steps modal now shows results properly if previous filters are still applied

  • 'No Steps' text shown instead of blank page for cases with no steps yet added

7th February, 2021 → Cloud: v1.9.3

New Features

  • Execute a single case from Jira issue - AIO Tests has added the ability to execute a case attached to a Jira issue from AIO Tests panel itself. The option is included in the ellipsis of each linked case as ‘Quick Execute’

  • See Executions of cases from Jira issue - Users can see the status of the last 3 runs for the last 5 cycles in which the case has been executed/added through the ‘Executions’ option available in the ellipsis of each linked case

  • Export/Import Cycle Run data to Excel - Users can now execute cases offline using Excel. On Cycle details page, users have an option to export the existing status in an Excel, update the excel offline with execution results and then import the updated excel back. New runs can be created for the updates coming from excel

Enhancements

  • Estimated effort field added for importing new cases - Users can now specify estimated effort in minutes while importing cases in AIO Tests

  • Linked Cases now have right hand panel - Artifacts can now be attached at the linked case level in the right hand side panel (RHSP) in Cycle Details page (earlier artifacts could only be attached at the steps of linked cases)

Minor Bug Fixes

  • User prompted with an error message if no cases found while exporting steps

  • Folders icon (burger icon) made more clickable if AIO Tests is opened from within a project

  • Misaligned icons while linking cases on Steps page is now fixed

26th January, 2021 → Server: v1.0.5

New Features

  • Hide Fields - Through Project settings, now users can customize which case fields they would like to hide for cases. Once hidden, the fields don't appear on Create Case window, Case details page and any of the case filters throughout the application

  • Cross-project linking - Now cases can be linked to stories of other projects and defects of other projects can be attached to cases/runs. The impact of this new feature can be seen in

    • Overview tab - will show defects from other projects if they are attached to cases of the viewed project

    • Case Details Requirements section - will show stories/issues from other projects if they are attached to the case

    • Case Details Defect Associations tab - will show defects from other projects if they are attached to the case

    • AIO Tests Jira Panel - will allow creation/linking of cases/cycles of multiple projects to the Jira issue being viewed

    • Reports - All reports showing linked stories/defects data will show data from multiple projects

  • Export Reports - Traceability Detail report can now be exported to Excel. With this release, all reports are exportable to Excel

Enhancements

  • Ability to go back in modals - Create/Edit Sets and Cycles modals now have the option to navigate to any step

  • More space on Steps page - Users can now have more space to write their test cases by either hiding the data column or by using the ability to increase the width of the box they are writing in

  • Refresh option on Sets and Cycles - The Set Detail and Cycle Detail page now have a refresh button along with the sort/filter/search buttons to allow for quick refresh of data when multiple people are working on the same set/cycle

  • Copy Requirements while copying case - The copy case modal gives the option to copy attached requirements too

  • Warn users about unsaved data - Users will now receive a warning if they navigate away without saving from the create case, case details and steps window

  • TestNG Automation - Users can now create a new case and add comments using the TestNG Automation integration

  • Public APIs - Users can use the public APIs to now add comments along with results

  • Create Case window update - The title of the newly created case will now be visible on the Add Steps page while creating a case

Minor Bug Fixes

  • For a newly created run, updates from RHSP (right hand side panel) now reflect correctly in status bar and LHSP (left hand side panel)

  • > character encoding changed to &gt while exporting data

  • Deletion of linked Jira issue was causing issues in Edit Cycle modal which is now fixed

  • Estimated effort updates are now visible in history

  • Jira panel updated to show single row if same defect is attached to run and step

  • Owner cannot be removed now from a case

10th January, 2021 → Cloud: v1.9.2

New Features

  • AIO Tests Jenkins Plugin - We have launched the Jenkins plugin using which results can be published in AIO Tests after execution from Jenkins

  • Cross-project linking - Now cases can be linked to stories of other projects and defects of other projects can be attached to cases/runs. The impact of this new feature can be seen in

    • Overview tab - will show defects from other projects if they are attached to cases of the viewed project

    • Case Details Requirements section - will show stories/issues from other projects if they are attached to the case

    • Case Details Defect Associations tab - will show defects from other projects if they are attached to the case

    • AIO Tests Jira Panel - will allow creation/linking of cases/cycles of multiple projects to the Jira issue being viewed

    • Reports - All reports showing linked stories/defects data will show data from multiple projects

Enhancements

  • Ability to go back in modals - Create/Edit Sets and Cycles modals now have the option to navigate to any step

  • More space on Steps page - Users can now have more space to write their test cases by either hiding the data column or by using the ability to increase the width of the box they are writing in

  • Refresh option on Sets and Cycles - The Set Detail and Cycle Detail page now have a refresh button along with the sort/filter/search buttons to allow for quick refresh of data when multiple people are working on the same set/cycle

  • Copy Requirements while copying case - The copy case modal gives the option to copy attached requirements too

Minor Bug fixes

  • For a newly created run, updates from RHSP (right hand side panel) now reflect correctly in status bar and LHSP (left hand side panel)

  • > character encoding changed to &gt while exporting data

  • Deletion of linked Jira issue was causing issues in Edit Cycle modal which is now fixed


19th December, 2020 → Cloud: v1.9.1

Features

  • Hide Fields - Through Project settings, now users can customize which case fields they would like to hide for cases. Once hidden, the fields don't appear on Create Case window, Case details page and any of the case filters throughout the application

  • Export Reports - Traceability Detail report can now be exported to Excel. With this release, all reports are exportable to Excel

Enhancements

  • Warn users about unsaved data - Users will now receive a warning if they navigate away without saving from the create case, case details and steps window

  • TestNG Automation - Users can now create a new case and add comments using the TestNG Automation integration

  • Public APIs - Users can use the public APIs to now add comments along with results

  • Create Case window update - The title of the newly created case will now be visible on the Add Steps page while creating a case

Minor Bug fixes

  • Estimated effort updates are now visible in history

  • Jira panel updated to show single row if same defect is attached to run and step

  • Owner cannot be removed now from a case


29th November, 2020 → Server: v1.0.4

First Server version released. It encompasses all the features released for Cloud so far with few exceptions listed below

  • For the right panel of Runs and Steps, in the Defects tab, the option “or Create Jira Issue instead” is not available for Server

  • For Reports input screen for Traceability Summary and Detailed report, the option for creating your JQL through Jira’s screen is not available for Server

  • Public APIs have not yet been exposed for Server


22nd November, 2020 → Cloud: v1.9

New Features

  • Copy Run Results - While adding a run for newly created cases, users now have the option to copy previous run’s statuses, comments, defects and attachments

  • Reports - Multi-cycle Execution Summary report can now be exported to Excel along with all the other reports (except Traceability Detailed report - coming soon)

Enhancements

  • AIO Tests Jira Panel

    • The quick create will show the new row at the bottom so that the user doesn’t have to scroll

    • The owner column has moved to the last.

    • The panel will now be enabled on all issues of a project (needs to be enabled on project first) once it’s enabled on any one issue of the project

  • Case Type Filter - Case Type has been added as a filter in Cases listing, Add Cases screen and in Execution Detail report

  • Hide Already Added Cases option - The “Add Existing Cases” screen from Cycle Detail and Set Detail page (Manage Cases → Add Existing Cases) now has an option to hide the cases already added in the set/cycle. This allows user to shorten the list further and easily see the cases that have not yet been added

Minor Bug Fixes

  • Updated the sharing link of Execution detail report when input modal was opened from within the report


7th November, 2020 → Cloud: v1.8.1

New Features

Enhancements

  • The color and size of the icon to share the URL has been updated so it doesn’t cause confusion with linked case icon (listing page and details page)

  • timestamp on system saved images (print screen)

Minor Bug Fixes

  • Step # is now shown on step’s right hand panel

  • Set actions on Sets tab is visible properly


31st October, 2020 → Cloud: v1.8

New Features

  • Project Settings - Jira Admins and Project Admins can Create, Edit, Delete and Archive Case Types through Project Settings page

  • Sharing - Users can now share Cases, Sets and Cycles by copying links using the hover over action on keys of all entities

  • Open in New Window - A hover over action is now available on keys to open the case, set and cycle in new window

  • Export Reports - Execution Burndown, Execution Distribution and Traceability Summary report can now be exported to Excel

Enhancements

  • Users can now attach printscreen grabs (clipboard images) by pasting in the Attachments tab of Run panel, Steps panel and Case Detail page

  • Cycle details page has a new filter - Folders; allowing users to filter cases for execution based on Folders

Minor Bug Fixes

  • Execution distribution report by Requirements shows Unassigned correctly now (previously was shown as link)

  • Daylight Saving changes handled for Overview page

  • Defects tab in Recently Accessed section of Overview fixed for deleted Jira bugs


18th October, 2020 → Cloud: v1.7

New Features

  • Share Reports - Traceability reports are now shareable via URL like cycle and project metrics reports

  • Export Reports - Single Cycle Execution Summary report can be exported to Excel

  • Rich Text Format - Case Steps page now has RTF capabilities - Bold, Italics, Underline, Strikethrough, Undo/Redo, Bullet list and Numbered list. RTF is available for Steps and Comments. It is viewable from Cycle Details and exported reports

  • Copy Steps - Users can copy steps from multiple cases into the target case

Enhancements

  • Import Page - Import page now has a back button allowing easier navigation to Cases listing

  • Cycle Details Page - The listing of Cases in Cycle Details page is scrollable and the Run panel on the right side stays sticky

Minor Bug Fixes

  • Create Cycle from Case modal now shows the folder as Not Assigned instead of previously selected cycle folder

  • Associations tab of a Case shows assignee information correctly

  • Sorting on cycles with Adhoc cycle fixed


7th October, 2020 → Cloud: v1.6.1

New Features

  • Share Reports - Users can now share reports via URL with other users by using the “Share” option for all the Single and Multi Cycle Execution reports as well as Project Metrics Report

  • Export Reports - Project Metrics report can be exported to Excel in addition to Execution Detail report

  • Open Defect count - An additional metric of “Open Defects” has been added to the Execution Summary report summary boxes for All Defects and Latest Run Defects

Minor Bug Fixes

  • Dates in exported report shows correct values now


27th September, 2020 → Cloud: v1.6

New Features

  • Bulk Edit Cases - Bulk Actions on Cases now include an Edit option that allows to edit Case fields on multiple cases. Fields include - preconditions, owner, priority, status, type, component, release, estimated effort, tags, Jira stories, Automation status and Automation owner

  • AIO Tests Jira Panel - Users can now create a case and a cycle directly from the Jira issue you are viewing. The newly created case/cycle gets automatically linked to the Jira issue

  • Reports - Execution Detail report can now be exported to Excel. More reports will have Export functionality in upcoming releases

  • Import Cases - Users can now import cases from an Excel file

Enhancements

  • Import Cases - Additional fields that can now be imported are - Automation Key (JUnit), Automation Status and Tags

  • Case Step Screen Enhancements -

    • Tab creates new step on last step

    • Auto focus on Step on creating new step

    • Separators added for better visibility

  • Reports - Case keys are now links in all reports to take to the Case Detail page

  • Search and Pagination Count Preferences - Search text and pagination count is saved for a user’s session

  • Release Notes - Easy access to Release Notes added in App Settings

Minor Bug Fixes

  • Resolved No Test Cycle found error on Jira panel

  • When case is created with automation status as Automated, that automation date doesn't get updated


9th September, 2020 → Cloud: v1.5

New features

  • Multi-cycles summary report - Generate execution summary report for multiple cycles to see progress across specified cycles along with defect details

  • Create Cycle from Cases tab - Quickly create a cycle from the case view or from a case folder or by bulk selecting cases with filters

  • Export cases to CSV and Excel - Export of AIO Tests cases is now available. Users can export their cases to Excel or a .csv file

Enhancements

  • Navigating to Details page - instead of right chevron (>), the keys of entities (cases, sets and cycles) have been made as links. Clicking on the key link takes to details page. Clicking on the row continues to open the right hand quick panel

  • Report input screens - The input screen for all reports have been enhanced with search capabilities to search for specific cycles. Users will now be able to search for cycles by Release, Folder, Components and Tags

  • Import Cases - Import now supports linking multiple Jira stories to imported case, by specifying a comma separated list of stories

  • Bulk Actions - Bulk selection across multiple pages in paginated view is now supported

Minor bug fixes

  • Deletion of a case when launched in a new window will now take to cases listing

  • Cycles listing sorting and cases sorting in Add Cases modal fixed

  • Option to remove assignment from RHSP of case in a cycle enabled


24th August, 2020 → Cloud: v1.4

New features

  • Create bug/defect from within app - Now you can create a bug from the right panel of a Run/Step from the defects tab by clicking “or Create Jira issue instead”

  • Execution Distribution report - Execution Distribution report helps managers view cycle execution progress by different parameters: User assignment, Case priority, Case Type, Jira Requirements, and Case tags

  • JUnit framework integration - Support for JUnit testing framework has been added for importing automation execution results. Users can now import their JUnit execution results via REST APIs, Cycles listing and Cycle details page

Enhancements

  • Execution Summary report from Cycles Listing & Details - Users can generate the summary report for a cycle right from the cycles listing page or from the detail page of the cycle via the actions available from ellipsis

  • Contextual Help - Users can learn more about various functionalities as documentation links have been added throughout the app

  • Automation Owner filter - Automation Owner introduced as an option for filtering cases from all pages with list of cases

  • Impacted Executions - The AIO Tests Jira panel now has a new tab called Impacted Executions which will populated if the Jira issue/defect is linked to a case in AIO Tests thus allowing review of bug impact right from Jira

Minor bug fixes

  • Terminology fixes

  • Slowness fixes

  • Delimiter fix for Import Cases functionality


3rd August, 2020 → Cloud: v1.3

New Features

  • TestNG framework integration - Expanding AIO Tests automation capabilities, TestNG Framework integration with AIO Tests has been released. Users can now import their TestNG execution results via REST APIs, Cycle listing page and Cycle Details page

Minor Bug fixes

  • Status percolation up and down fixed from right panel to reflect properly on left panel

  • Last updated time now gets updated if Actual effort is entered


26th July, 2020 → Cloud: v1.2

New Features

  • Easier to Connect with support - Contact Us & Request Demo option have been added to the gear icon within App making it easier to reach out to support if needed

  • Create case option from Overview - For a newly enabled project, the Overview tab now contains a ‘Create Case’ button that opens the Create Case window and upon creation takes the user directly to the Cases listing

  • Automation Attributes for Cases - Automation Owner and Automation Status fields have been added for Cases enabling Automation workflow tracking

  • Automation Attributes for Runs - Execution Mode (manual vs automated) has been added at the Run level in Cycle details page. Public REST APIs have been updated to accommodate setting of this field

  • Traceability Summary Report - This report gives a quick summary when you want to view the current testing status. For QA’s, this report may be very useful to get high level summary of whether a requirement has been covered by a case or not

Enhancements

  • Show 20 records by default - All listings have now been updated to default to 20 records instead of 10

  • Reports now show Automation attributes - Existing reports have been updated to include Automation Owner and Automation Status fields, if applicable

  • Add cases modal update - The modal from where cases can be added to a Set or a Cycle has been updated to state that only published cases are shown in the list

Minor Bug fixes

  • Copy cycle from Cycle details page now copies tags and assignments

  • Auto-complete drop-downs in the app have been updated to not show values already added to the list


23rd June, 2020 → Cloud: v1.1

New Features

  • Create Cycle from Set - Users can now create a cycle directly from a Set. The option is available from ellipsis on Sets listing and Set details page

Enhancements

  • Assignee Filter - Now users can filter cases assigned to them for execution on the cycle details page as Assignee filter has been added

  • Public APIs Documentation - Public APIs have been documented on Swagger for users to try

  • Bulk Actions - A select all checkbox has been introduced allowing users to select all the cases/sets/cycles on listing pages

Minor bug fixes

  • Deletion of Set success message is now appearing

  • Bulk actions disabled if no cases/cycles/sets have been selected

  • Start date, end date sorting fixed on cycles listing


8th June, 2020 → Cloud: v1.0

This is our first Release with the base product. The initial app contains all the below features.

  • Overview dashboard for the testing progress of the project along with easy creation and management of Cases, Sets and Cycles

  • Automation support via REST APIs

  • Cases

    • Case creation with steps, data and expected results

    • Case linking to Jira stories/requirements

    • Case reusability using linking of cases feature

    • Case organization in folders

    • Quick view panels

    • Case associations with sets, cycles and defects

    • Easy searching, filtering and sorting

    • Case history

    • Import cases via .csv file

    • View cases from Jira issues

  • Sets

    • Set creation for logical organization of cases

    • Quick view panels

  • Cycles

    • Cycle creation with addition of cases and assignments

    • Cycle detail page with comprehensive status

    • Cycle detail page with easy management of execution runs, comments, defects and attachments

    • Quick view panels

  • Reports

    • Traceability Detailed report

    • Execution Summary report

    • Execution Detail report

    • Execution Burndown report

    • Project Metrics report